- ページ 20

食器洗い機 Bosch SGV68U53UC/C6のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Bosch SGV68U53UC/C6 27 ページ。

Care and Maintenance

A regular inspection and maintenance of your machine will help to prevent faults. This saves time and

prevents future problems.

Overall condition of the machine

Never use a steam cleaner to clean your dishwasher. The manufacturer is not responsible for any con-

sequential damage.

Regularly wipe the front of the appliance with a damp cloth - water and a small amount of liquid soap is

adequate. Do not use sponges with a rough surface or abrasive detergents, as these could scratch the

surfaces.

Stainless steel appliances: To prevent corrosion, avoid using sponge cloths or chlorine based cleaners.

Use a stainless steel polish to seal and protect the surface.

Clean the outer edges of the inside door panel regularly to remove debris that may collect from normal

loading. If spots begin to appear on the stainless steel, make sure the rinse agent is full and functioning

properly.

Use caution when removing parts for cleaning as some debris may be sharp.

Filters

The filter system consists of a coarse filter, a flat fine filter and a micro fil-

ter. The filters keep large foreign objects in the rinsing water away from the

pump. Foreign objects may occasionally block the filters.

Check the filters for residue by:

• Unscrew the filter cylinder as illustrated in Figures 12-13 and take out the

filter system.

• Remove any residue and clean filters under running water.

• Reinstall filter system in reverse sequence and ensure that the arrow

marks are facing each other after locking it into place.

Spray Arms

Check spray arms for grease and limescale deposits.

If you find such deposits:

• Fill detergent dispenser with detergent and start the appliance without

utensils in the cycle with the highest rinsing temperature (see wash cycle

information table).

• Clean the appliance with detergents/ appliance cleaners which are par-

ticularly suitable for use with dishwashers.

• Unscrew the spray arms and inspect as shown in Figure 14.

WARNING

Figure 12

Figure 13

Figure 14