- ページ 3

エアコン AirStage AGYA014GCAHのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。AirStage AGYA014GCAH 15 ページ。 Indoor unit (floor type)
AirStage AGYA014GCAH にも：取扱説明書 (8 ページ)

ページを印刷する

2.3. Accessories

For installation purposes, be sure to use the parts supplied by the manufacturer or other

prescribed parts.

The use of non-prescribed parts can cause serious accidents such as the unit falling,

water leakage, electric shock, or fire.

• The following installation parts are furnished. Use them as required.

• Keep the Installation Manual in a safe place and do not discard any other accessories

until the installation work has been completed.

Name and Shape

Q'ty

Operating

Manual

Installation

Manual

Operating

Manual

(CD-ROM)

Wall hook bracket

Tapping screw (M4 × 25 mm)

Cloth tape

Push mount cable tie

Air cleaning filter

2.4. Optional parts

Descrip-

Model

tion

UTY-XWZXZC For output function (Output terminal / CNB01)

For control input function (Apply voltage terminal /

UTY-XWZXZB

CNA01)

External

UTY-XWZXZD For control input function (Dry contact terminal / CNA02)

connect kit

For forced thermostat off function (Apply voltage terminal

UTY-XWZXZ7

/ CNA03)

For forced thermostat off function (Dry contact terminal

UTY-XWZXZE

/ CNA04)

WARNING

Application

(This book)

For indoor unit installation.

For wall hook bracket installation.

For indoor unit installation.

For transmission and remote controller

cable binding

For installation, refer to the "CLEANING

AND CARE" in the operating manual.

Application

3. INSTALLATION WORK

Correct initial installation location is important because it is difficult to move unit after it is

installed.

3.1. Selecting an installation location

Decide the mounting position together with the customer as follows.

Select installation locations that can properly support the weight of the indoor unit.

Install the units securely so that they do not topple or fall.

Do not install the indoor unit in the following areas:

• Area with high salt content, such as at the seaside. It will deteriorate metal parts, caus-

ing the parts to fail or the unit to leak water.

• Area filled with mineral oil or containing a large amount of splashed oil or steam, such

as a kitchen. It will deteriorate plastic parts, causing the parts to fail or the unit to leak

water.

• Area that generates substances that adversely affect the equipment, such as sulfuric

gas, chlorine gas, acid, or alkali. It will cause the copper pipes and brazed joints to

corrode, which can cause refrigerant leakage.

• Area that can cause combustible gas to leak, contains suspended carbon fibers or

flammable dust, or volatile inflammables such as paint thinner or gasoline. If gas leaks

and settles around the unit, it can cause a fire.

• Area where animals may urinate on the unit or ammonia may be generated.

Do not use the unit for special purposes, such as storing food, raising animals, growing

plants, or preserving precision devices or art objects.

It can degrade the quality of the preserved or stored objects.

Do not install where there is the danger of combustible gas leakage.

Do not install the unit near a source of heat, steam, or flammable gas.

Install the unit where drainage does not cause any trouble.

Install the indoor unit, power supply cable, transmission cable, and remote controller

cable at least 1 m away from a television or radio receivers. The purpose of this is to

prevent TV reception interference or radio noise. (Even if they are installed more than 1

m apart, you could still receive noise under some signal conditions.)

If children under 10 years old may approach the unit, take preventive measures so that

they cannot reach the unit.

Take precautions to prevent the unit from falling.

(1) Install the indoor unit on a place having a sufficient strength so that it withstands

against the weight of the indoor unit.

(2) The inlet and outlet ports should not be obstructed; the air should be able to blow all

over the room.

(3) Leave the space required to service the air conditioner.

(4) Install the unit where connection to the outdoor unit (or RB unit) is easy.

(5) Install the unit where the connection pipe can be easily installed.

(6) Install the unit where the drain pipe can be easily installed.

(7) Install the unit where noise and vibrations are not amplified.

(8) Take servicing, etc., into consideration and leave the spaces. Also install the unit

where the filter can be removed.

(9) Do not install the unit where it will be exposed to direct sunlight.

WARNING

CAUTION

En-2