- ページ 17

エアコン AirStage ARUL14RLAVのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。AirStage ARUL14RLAV 20 ページ。 Indoor unit (duct type)
AirStage ARUL14RLAV にも：取扱説明書 (8 ページ)

ページを印刷する

6.7. Receiver unit (Optional parts)

Connection method

• Connection terminals

Controller PCB

• Wiring arrangement

Controller PCB

• Use 7 pins for receiver unit cable.

• At ﬁ rst, connect the receiver unit cable to the controller PCB.

• Attach the core that comes between controller PCB and the clamp.

• Use conduit hole when external output cable is used.

6.8. Auto louver grille (Optional parts)

Connection method

• Connection terminals

Controller PCB

Receiver unit terminal

(CN18)

Core

Clamp

Auto louver grille terminal (CN12)

• Wiring arrangement

Controller PCB

6.9. Optional parts cable binding

Power supply

cable

Avoid touching the ceiling with the wiring

Ceiling

Do not bind the power supply cable and other cables together.

To protect the cable insulation after opening a knockout hole, remove any burrs from

the edge of the hole.

7. FIELD SETTING

Here are 3 methods for address setting by FIELD SETTING as follows.

Set by either of the methods.

Each setting method is described (1) to (3) below.

(1) IU AD, REF AD SW settings .............. This section (7.1. Setting the address)

(2) Remote controller settings ............... Refer to the wired or wireless remote controller

(3) Automatic address settings ............. Refer to the outdoor unit manual for detailed

Be sure to turn OFF the power before performing the ﬁ eld setting.

Clamp

Binder (Medium/Accessories)

Remote sensor, Receiver unit

and Auto Louver grille

Binder (Medium/Accessories)

External input and external

output

Avoid covering the air inlet

with the wiring.

CAUTION

manual for detailed setting information. (Set IU

AD, REF AD SW to 0)

setting information. (Set IU AD, REF AD SW to 0)

CAUTION

En-16