- ページ 15
ボート Advanced Elements AdvancedFrame AE1007-EのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Advanced Elements AdvancedFrame AE1007-E 20 ページ。 Convertible elite, 1 or 2 person kayak
ページを印刷する
PROBLEM
The kayak will not hold
full pressure for more
than a couple of hours.
Kayak still loses air.
Tube is kinked or
bent in.
Water in the kayak.
one side.
SOLUTION
Make sure that the plunger is in the closed position. It should only
If you have checked all the previous possible reasons for the kayak
losing air, then there may be a pinhole or a puncture somewhere on the
where a leak may be, take a clean rag with soapy water and begin rub-
bing the tube. If a hole is present, bubbles will continually form. Repair
using repair kit. If it is a very small pinhole, a dab of the glue may be
justing the position of the tube inside of the outer shell. The
proximately ten minutes. Fin will conform to its original shape. Even if
puddle up on the deck and leak through the zipper. Make sure that the
a spray skirt from our accessories list from a dealer. This will help keep
the inside of the kayak dry as well as you.
A kayak will always head in the direction of your last stroke. The longer
uneveness in the kayak.
®
ck rubber
-
-
r is prop-
15