- ページ 7
アクションカメラ DragonTouch Vision 3 ProのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DragonTouch Vision 3 Pro 14 ページ。
ページを印刷する
CUSTOMIZING YOUR VISION 3 PRO
Press Mode button three times to enter Settings.
00:02:15
29.1G
Video
4K 30FPS
Video & Photo Setting
1. Video Resolution: 4K 30FPS, 2.7K 30FPS, 1080P 60FPS, 1080P 30FPS, 720P 120FPS,
720P 60FPS, 720P 30FPS
Default setting is 4K 30FPS.
2. Recording Sound: On / Off
Default setting is On.
Turn off Recording Sound, the camera does not record sound when you record video.
3. Time Lapse Video: Off, 0.5s, 1s, 2s, 5s, 10s, 30s, 60s
Default setting is Off.
Time Lapse Video creates video from frames captured at specific intervals. This option lets
you capture a time lapse event and immediately view or share it as a video. Time Lapse
Video is captured without audio.
4. Loop Recording: Off, 2minutes, 3minutes, 5minutes
Default setting is Off.
09
Video Resolution
Recording Sound
TimeLapse Video
Tap here
Using Loop Recording, you can continuously record video, but save only the moments
that you want. For example, if you select a 5-minute interval, only the previous 5 minutes
are saved when you press the OK button to stop recording. If you record for 5 minutes
and do not press the OK button to stop recording and save, the camera records a new
5-minute interval by recording over your previous 5 minutes of footage. When the micro
4K 30FPS
SD card is full, the new files will cover the old one if loop recording is on.
5. Slow Motion Video: 1080P 60FPS, 720P 120FPS
Default setting is 720P 120FPS.
Slow motion is an effect in film-making whereby time appears to be slowed down.
Note: Slow motion video is captured without audio.
0.5s
6. Photo Resolution: 16M, 14M, 12M, 8M, 5M
Default setting is 16M.
7. Self-timer: Off, 3S, 5S, 10S, 20S
Default setting is Off.
Timed gives a delay between pressing the OK release and the OK's firing. It is most
commonly used to let photographers to take a photo of themselves (often with family).
8. Continuous Lapse: Off, 3S, 10S, 15S, 20S, 30S
Default setting is Off.
Turn on Continuous Lapse, this camera takes continuous lapse photo.
9. Burst Photo: Off, 3P/S, 5P/S, 10P/S
Default setting is Off.
Burst Photo captures up to 10 photos in 1 second, so it is perfect for capturing
fast-moving activities.
General Setting
1. Exposure: -3, -2, -1, 0, 1, 2, 3
Default setting is 0.
By default, your camera uses the entire image to determine the appropriate exposure level.
However, Exposure lets you select an area that you want the camera to prioritize when
10