- ページ 15
アンプ Dragster DAF 2502のPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。Dragster DAF 2502 18 ページ。 Power amplifiers
Dragster DAF 2502 にも： 設置および操作マニュアル (17 ページ)
ページを印刷する
CONTROLS
DAF 3001/5001/7001
#20
the DAF amps feature an advanced input
GAIn control from 0.2 to 6v to operate
efficiently at full power from any head unit.
Power and diagnostic indicators.
RCA head unit signal (only to Master
when bridging two amps).
RCA preamp output.
Using the ReMote SUBWooFeR ContRol in a multi amp
system, the bass remote of the Master amp will control all
amps in the system. Use the proper cable supplied.
28
SUBSonIC FIlteR especially used for vented
the amp includes a BASS eq with a center frequency at
enclosures it should be set at vent tuning
45hz which can be adjusted for up to 9db of additional
frequency to protect against woofer unloading.
gain at that frequency.
controls to be used bridging
two amps in MASteR/SlAve mode.
the adjustable PhASe ContRol will help fine tune
your bass system to time align with midrange and high
frequency speakers.
the CRoSSoveR features a step 24db per octave
slope ensuring that only the lowest frequencies
are reproduced by the amplifier.
CONTROLS
DAF 2502
#21
the DAF amps feature an advanced input
GAIn control from 0.2 to 8v to operate
Set hPF and lPF to on position and adjust to desired
efficiently at full power from any head unit.
frequency. on oFF position the response is full range.
RCA head unit signal.
RCA preamp output.
Power and diagnostic indicators.
CONTROLS
DAF 4002
#22
the DAF amps feature an advanced input
Set hPF and lPF to on position and adjust to desired
GAIn control from 0.2 to 8v to operate
efficiently at full power from any head unit.
frequency. on oFF position the response is full range.
RCA preamp output.
RCA head unit signal.
CRoSSoveR MUltIPlIeR: pushing multiplies
by 10 the desired frequency.
ReMote SUBWooFeR ContRol.
Use the supplied cable only.
Power and diagnostic indicators.
29