- ページ 7

メディア・コンバーター DRAKE DSE24のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DRAKE DSE24 20 ページ。 Hd encoder with closed captioning

Rear Panel Controls

R1, RF OUTPUT - this type "f" connector is the high level (+29.5 dbmV to +45 dbmV), 5 to 1002 mHz, output

from the DSe24 Rf output section.

R2, DC POWER CONNECTOR - this connector provides the means for connection to the 5 VDC output of the

supplied external power supply.

R3, CAPTION - this connector provides the means to input closed captioning.

R4, AUDIO L & R - these two color coded RCA type connectors provide baseband audio Left (white) and Right

(red) inputs to the DSe24 encoder.

R5, VGA LOOP OUTPUT - this connector provides VGA video output to a monitor or other equipment requiring

VGA input. it is only active when VGA is input on R6.

R6, VGA INPUT - this VGA type connector provides the means to input VGA video from a computer or other device

with VGA output.

R7, COMPONENT VIDEO - these three color coded RCA connectors, Cr (red), Cb (blue), and y (green), provide

the means to input component video. to input composite video, use the green 'y' connector.

R8, HDMI CONNECTOR - this connector provides the means to input HDmi video (without HDCP) and encoded

audio.

R9, ETHERNET CONNECTOR - this connector provides the means to connect the DSe24 to an ethernet local

area network for remote control, monitoring, and/or firmware update. it is not recommended that this port be

connected directly to a wide-area network without external access controls, like a VPN or firewall.

R10, COOLING AIR VENTS - Do not block.