- ページ 19

ページを印刷する

hPower manager

Y ou can use the power manager to set the total power

P o w e r m a n a g e r

of the hob.

The hob is preset at the factory. Its maximum

performance is specified on the rating plate. You can

use the power manager to change the value in

accordance with the requirements for the relevant

electrical installation.

In order not to exceed this set value, the hob

automatically distributes the power available between

the cooking zones that are switched on.

As long as the power manager function is activated, the

output of a cooking zone may temporarily fall below the

nominal value. If a cooking zone is switched on and the

power limit is reached,

display for a short time. The appliance automatically

regulates and selects the highest possible power level.

For more information about how the total power of the

hob is changed, see section ~ "Basic settings"

appears in the heat setting

DCleaning

S uitable maintenance and cleaning products can be

C l e a n i n g

purchased from the after-sales service or in our e-Shop.

Hob

Cleaning

Always clean the hob after cooking. This will prevent

food deposits from becoming burned on. Only clean the

hob after the residual heat indicator has gone out.

Clean the hob with a damp dish cloth and dry it with a

cloth or towel to prevent limescale build-up.

Only use cleaning agents that are suitable for this type

of hob. Observe the manufacturer's instructions on the

product packaging.

Never use:

Undiluted washing-up liquid

■

Cleaning agents designed for dishwashers

■

Abrasive cleaners

■

Harsh cleaning agents, such as oven spray and

■

limescale remover

Scouring pads

■

High-pressure cleaners or steam jet cleaners

■

Stubborn dirt is best removed with a glass scraper,

available from retailers. Observe the manufacturer's

instructions.

You can obtain a suitable glass scraper from customer

services or through our online shop.

Using a special sponge for cleaning glass-ceramic

hobs achieves a great cleaning result.

Potential marks

Limescale and water

Clean the hob as soon as it has cooled down.

marks

You can use a cleaning agent suitable for

glass-ceramic hobs.*

Sugar, rice starch or

Clean immediately. Use a glass scraper. Cau-

plastic

tion: Risk of burns.*

* Then clean with a damp dish cloth and dry with a cloth or towel.

Do not use any cleaning agents while the hob is

Note:

still hot. This may mark the surface. Make sure that any

residue left by cleaning agents is removed.

Hob surround

To prevent damage to the hob surround, observe the

following instructions:

Only use warm soapy water

■

Wash new dish cloths thoroughly before use.

■

Do not use harsh or abrasive cleaning agents.

■

Do not use a glass scraper or sharp objects.

■