- ページ 41

洗濯機 Bosch 8 SeriesのPDF ユーザーマニュアルと設置手順をオンラインで閲覧またはダウンロードできます。Bosch 8 Series 44 ページ。 Combi steam oven
Bosch 8 Series にも：取付説明書 (21 ページ), 組み立て説明書 (4 ページ), 取付・使用説明書 (16 ページ), クイック・リファレンス・マニュアル (2 ページ), ユーザーマニュアルと設置手順 (44 ページ), はじめに (7 ページ), 取扱説明書 (32 ページ), ユーザーマニュアルと設置手順 (32 ページ), 取扱説明書 (12 ページ), ユーザーマニュアルと設置手順 (24 ページ), ユーザーマニュアル (28 ページ), ユーザーマニュアルと設置手順 (28 ページ), 取付・使用説明書 (20 ページ), 取扱説明書 (12 ページ), ユーザーマニュアルと設置手順 (40 ページ), ユーザーマニュアルと設置手順 (32 ページ), ご利用案内 (20 ページ), 取扱説明書 (48 ページ)

ページを印刷する

Hob type

Induction hob

Full-surface induction hob

Gas hob

Electric hob

Observe different national installation instructions for the hob.

27.5 Installation in a tall unit

Observe the installation dimensions and the installation

instructions when installing in a tall unit.

¡ To ventilate the appliance, the intermediate floors

must have a ventilation cut-out.

¡ In order to ensure sufficient ventilation of the appli-

ance, there must be a ventilation opening of at least.

200 cm² in the base area. To do this, trim the base

panel or fit a ventilation grille. Ensure that the air ex-

change is guaranteed in accordance with the dia-

gram.

¡ If the tall unit has another back panel in addition to

the element back panels, this must be removed.

¡ Only fit the appliance up to a height which allows

accessories to be easily removed.

a raised in mm

a flush in mm

27.6 Corner installation

Observe the installation dimensions and the installation

instructions when installing in a corner.

¡ To ensure that the appliance door can be opened,

you must take the minimum dimensions into consid-

eration when installing in a corner. The dimension

is dependent on the thickness of the unit front and

the handle.

27.7 Electrical connection

In order to safely connect the appliance to the elec-

trical system, follow these instructions.

¡ The appliance corresponds to protection class I and

must only be operated with a protective earth con-

nection.

¡ The fuse protection must correspond to the power

rating specified on the appliance's rating plate and

to the local regulations.

¡ The appliance must be disconnected from the

power supply whenever installation work is being

carried out.

¡ The appliance must only be connected using the

power cable provided.

¡ The power cable must be plugged in at the rear of

the appliance until you hear a clicking sound. A 3 m

power cable can be obtained from the after-sales

service.

¡ The power cable must only be replaced with a cable

from the original manufacturer. This is available from

after-sales service.

¡ Contact protection must be guaranteed by the in-

stallation.

¡ If the display on the appliance remains dark, it has

not been connected correctly. Disconnect the appli-

ance from the mains and check the connection.

Electrically connect the appliance with the

protective contact plug

Note: The appliance must only be connected to a pro-

tective contact socket that has been correctly installed.

Insert the plug into the protective contact socket.

▶

Installation instructions en

b in mm