- ページ 4

洗濯機 Bosch FAP-OC 500SeriesのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Bosch FAP-OC 500Series 21 ページ。 Built-in wall ovens
Bosch FAP-OC 500Series にも： 取扱説明書 (40 ページ), インストレーション・マニュアル (6 ページ), 製品情報 (40 ページ), インストレーション・マニュアル (28 ページ), ユーザーマニュアル (48 ページ), ユーザーマニュアル (48 ページ), インストレーション・マニュアル (28 ページ), 取扱説明書 (44 ページ), インストレーション・マニュアル (32 ページ), 取扱説明書 / 設置手順書 (40 ページ), クイック・リファレンス・マニュアル (4 ページ), 取扱説明書 (27 ページ), インストレーション・マニュアル (24 ページ), インストレーション・マニュアル (32 ページ), 取扱説明書 (24 ページ), インストレーション・マニュアル (28 ページ), サービスマニュアル (41 ページ), 取扱説明書 (21 ページ), インストレーション・マニュアル (32 ページ), サービスマニュアル (36 ページ), インストレーション・マニュアル (32 ページ), クイック・スタートと安全マニュアル (13 ページ)

ページを印刷する
Bosch FAP-OC 500Series 取付説明書
1. Prepare Cabinets
General Instructions:
•
The single oven can be installed under a counter or
in a wall or cabinet. The double oven can be
installed in a wall or cabinet.
•
Choose a location away from strong drafts and
where electrical power can be provided.
•
The oven support surface must be a minimum 3/4"
thick plywood platform. For single ovens, it must
support 150 pounds. For double ovens, it must
support 290 pounds. The platform must be solid,
level and flush with the bottom of the cabinet cut
out.
Cabinet Cutout Dimensions
See Table 1, below and Figures 1, 2 and 3 on following
page for cutout dimensions.
2. Prepare Electrical Outlet
Warning: Turn power off at service panel and
lock service panel before beginning.
General Information
Ovens are dual rated for use on either 120/240 VAC
or 120/208 VAC. See Table 2 at right for power ratings
and circuit breaker sizes based upon the supply volt-
age for each model.
The junction box must be located in the indicated
space in Figures 1,2 and 3, next page. It should be
easily reached through the front of the cabinet where
the oven will be located.
Verify that wiring to house is adequate.
Contact your local utility company to verify that the
present electric service to your home is adequate. In
some instances, the size of the wiring to the house
and service switch must be increased to handle the
electrical load demanded by the oven.
Ltr.
A
Cutout Width
B
Cutout Depth
C
Cutout Height
D
Floor to Bottom of Cutout
E
Top of Cutout to Opening Above
F
Bottom of Cutout to Opening Below
Single Oven Under Cabinet Installation Only:
G
Top of Cutout to Top of Counter
H
Side of Cutout to Adjacent Door or
Drawer Front
I
Oven Door Frame Width
2 • English
Steps 1 through 3: Preparation
Dimension
4 1/2" min
Verify that wiring inside house is adequate.
Most wiring codes require a separate circuit with sepa-
rate disconnect switch and fuses either in the main
entrance panel or in a separate switch and fuse box.
Most local building regulations and codes require that
electrical wiring be done by licensed electricians. Be
sure to install your oven according to the electric codes
in place in your region.
3. Prepare Oven
Remove any remaining packaging and discard. Remove
racks, accessories and oven door(s) and set aside. See
instructions in Use and Care Manual for proper removal
of oven doors. DO NOT lift oven by door handles!
Place oven in front of cabinets where it is to be in-
stalled. Rest it on a jack or other sturdy support so that
it is in line with the cabinet cutout.
Table 2: Electrical Specifications
Electrical Specifications
Model
HBL503,
HBL504
HBL505,
HBL506
HBN504
HBN505
HBL73
HBL74,
HBN74
HBL75,
HBN75
HBL76,
HBN76
Single
27"
30"
25 3/8"
28"
24"
24"
23"
23"
34"
34"
1" min
1" min
1/4" min
1/4" min
4 1/2" min
1/4" min
1/4" min
26 5/8"
29 1/2"
Watts
Volts
3,350
120/240
120/208
2,925
120/240
6,350
120/208
5,300
120/240
3,250
120/208
2,820
120/240
6,250
120/208
5,400
120/240
3,600
120/208
2,500
120/240
3,650
120/208
3,550
120/240
7,250
7,050
120/208
120/240
7,300
120/208
7,100
Double
27"
30"
25 3/8"
28"
24"
24"
47 13/16"
47 13/16"
N/A
N/A
1" min
1" min
1/4" min
1/4" min
N/A
N/A
N/A
N/A
N/A
N/A
Amps
14
14.1
26.25
25.25
13.5
13.6
26
26
15.4
17.2
15.8
17.6
31.2
34.8
31.6
35.2