- ページ 12

洗濯機 Bosch Nexxt washer OperatingのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Bosch Nexxt washer Operating 26 ページ。
Bosch Nexxt washer Operating にも：取扱説明書 (37 ページ), 取扱説明書 (27 ページ)

ページを印刷する

Installation

step by step

1. Unpack the dryer.

2. Remove all objects from the

drum.

3. Check the dryer for visible

damage.

4. Position the dryer near the

installation location.

5. If required, change the door

hinges to the right

(see page 7).

6. If required, have customer

service install the exhaust air

outlet on the dryer (see

page 9).

7. Have the power supply cord

fitted by an authorized

technician (see page 8).

8. Install exhaust duct if

necessary.

Follow the installation

instructions supplied by the

appropriate manufacturer!

If space is very restricted, it is

recommended to fit the initial

parts of the exhaust duct to the

dryer before the dryer is moved

to its final installation location.

9. Move the dryer to its final

location and align.

CAUTION

Do not slide dryer across the

floor if height adjustable feet

have been extended. Feet and/or

dryer base may be damaged if

dryer is slid across floor with

height adjustable feet extended.

10. Position and then level the

dryer .

The dryer should be level with

all four feet firmly on the

ground. The dryer must not

wobble. If the dryer is not level

or if it does wobble, the feet

must be adjusted. Adjust the

height adjustable feet until the

dryer does not rock and is level,

both front to back and

side to side.

11. Connect the exhaust duct to

the exhaust air outlet on the

dryer.

12. Insert plug into the wall

receptacle.

Check list before

using the dryer

1. Check that steps 1-12 have

been implemented properly.

2. Ensure that the dryer is

connected to the power supply.

3. Read the operating instructions

to understand how your dryer

operates.

4. Conduct an appliance test:

q Check that the drum is

empty.

q Close the dryer door.

q Switch the dryer to "Extra

Dry" and then press the

Start button.

q After 3-5 minutes press the

Stop button and open the

door.

5. If the interior of the dryer feels

warm, the dryer has been

connected properly.

Switch the dryer to "OFF".

6. If the dryer does not work,

switch the dryer to "OFF".

Look in the troubleshooting

section (page 24) of the

OPERATING INSTRUCTIONS

and find the fault.

Preparing to transport

the dryer

step

by step

1. Rotate the program selector

to "OFF".

2. Pull out the power supply plug.

3. Disconnect the exhaust duct

from the exhaust air outlet on

the dryer.

4. Place any accessories in the

drum.

5. Close the door and secure with

adhesive tape.

6. Screw the height adjustable

feet of the dryer into the

housing to prevent them from

being damaged during

transportation.