- ページ 3

投影スクリーン Draper FlexShadeのPDF 説明書インストールと操作をオンラインで閲覧またはダウンロードできます。Draper FlexShade 16 ページ。 Exterior clutch-operated shade
Draper FlexShade にも：インストレーション＆オペレーションマニュアル (8 ページ), インストレーション・インストラクション (2 ページ), 取扱説明書 (12 ページ), 取付・取扱説明書 (11 ページ), 説明書インストールと操作 (12 ページ), 説明書インストールと操作 (16 ページ), 説明書インストールと操作 (4 ページ), 取扱説明書 (7 ページ), 説明書インストールと操作 (12 ページ)

ページを印刷する

FlexShade

Section 1 - Site Preparation

RECOMMENDED

PERSONNEL

1. Inspect all items prior to assembly:

a) Open cartons lengthwise and lay out all pieces.

b) Ensure that product is as ordered by checking

pieces against Page 1 of this document.

c) Arrange all pieces on flat surface in the general

manner they are to be installed.

2. Ensure mounting surface is strong enough to hold unit.

3. Look for any site conditions that could interfere with

installation or operation.

4. Verify unit measurements, ensuring it will fit in the

desired location.

Please Note:

Hem Bar does NOT retract into the Headbox.

Provide at least 2 1/4"

over a swinging window or door. Refer to Section

16, P. 15 for Hem Bar dimensions and details to

determine adequate clearance.

Please Note: Refer to appropriate sections within this document for different installation options:

SECTION 2, PAGE 4: Mounting Headbox with Brackets

(Standard Installation Method)

ENDCAP

DIMENSIONS

Crank-Operated ZIP

Please Note: Draper recommends that a team of at least TWO

Caution: Before mounting shades, verify measurements on label provided with shade,

and ensure unit is installed at correct width.

Please Note: Installer is responsible for selecting mounting hardware appropriate for site conditions.

clearance if mounting

(57mm)

3 "

(92mm)

(2)

E N D

2 "

(57 mm)

H E M

SECTION 5, PAGE 6: Direct Mounting to Ceiling or Wall

(Alternate Installation Method)

3 "

(92mm)

FlexShade

ZIP 92

Square

Headbox

page 3 of 16

people install this product.

C A P

B A R