- ページ 29
洗濯機 Bosch WAE24280MYのPDF 取扱説明書および取付説明書をオンラインで閲覧またはダウンロードできます。Bosch WAE24280MY 32 ページ。
ページを印刷する
Carefully turn on the tap and check
2.
that the connection points are not
leaking.
The screw connection is under
Note:
water pipe pressure.
Water drainage
Do not kink or protract the water
Note:
■
drainage hose.
Height difference between the
■
placement area and drainage point:
Minimum 0 cm - maximum 100 cm
You can lay the water drain hose as
follows:
Drainage into a wash basin
■
:
Warning
Risk of scalding!
When washing at high temperatures,
you may be scalded if you touch the
hot washing water (e.g. if draining
hot washing water into a wash
basin.) Do not touch the hot washing
water.
Caution!
Water damage
If the attached drainage hose slips
out of the wash basin due to high
water pressure when draining the
appliance, leaking water may cause
damage.
Secure the drainage hose to prevent
it from slipping out of the wash
basin.
Installation and connection
Caution!
Damage to appliance/textiles
If the end of the drainage hose is
immersed in the drained water, water
may be drawn back into the
appliance and damage the
appliance and/or textiles.
Ensure that:
– The sealing plug does not block
the outflow of the wash basin.
– The water drains quickly enough.
– The end of the drainage hose is
not immersed in the drained
water.
Drainage into a siphon
■
The connection point must be
secured using a hose clamp with a
diameter of 24-40 mm (available
from specialist dealers).
Outlet into a plastic pipe with
■
rubber bushing or into a drainage
pit
en
29