- ページ 19

洗濯機 Bosch wae28462gbのPDF 取扱説明書および取付説明書をオンラインで閲覧またはダウンロードできます。Bosch wae28462gb 36 ページ。

Changing the programme

If you have started the wrong
programme by mistake, you can
change it as follows:
Press the Start button to cancel the
1.
programme.
Select a different programme.
2.
Press the Start button again. The
3.
new programme starts from the
beginning.

Cancel the programme

Press the Start button to cancel the
1.
programme.
To cool the laundry: Select the Rinse
2.
programme.
Press the Start button again. The
3.
Rinse programme starts.
After the programme has ended, you
can remove the laundry.
Programme end during $
Rinse Stop
The $ Rinse Stop (without final spin)
symbol appears in the display panel,
and the Start button indicator lamp
flashes.
To end the programme:
Select the Spin or Empty
1.
programme.
Press the Start button.
2.

Programme end

The -‹- symbol appears in the display
panel, and the Start button indicator
lamp flashes.
If the N symbol also appears in the
display panel, the washing machine has
detected too much foam during the
wash programme and has automatically
switched on a rinse cycle to remove the
foam.
Operating the appliance
Add less detergent to the next
Note:
washing cycle with the same load.
Removing laundry/switching
off the appliance
Open the washing machine door
1.
and remove the laundry.
If you cannot open the
Note:
washing machine door, the
appliance is still locked. Wait until
the programme has ended.
Set the programme selector to the
2.
Off position. The appliance is
switched off.
Turn off the tap.
3.
Not required for AquaStop
Note:
models.
Scope of delivery ~ Page 28
Notes
Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
Leave the washing machine door
and detergent drawer open so that
any residual water can evaporate.
Always remove the laundry.
Always wait until the programme has
ended, as the appliance could still
be locked.
en
19