- ページ 5

電動工具 Draper 09536のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Draper 09536 20 ページ。 Bench mounted spindle moulder

ページを印刷する

GENERAL SAFETY INSTRUCTIONS

WARNING: When using electric tools basic safety

precautions should always be followed to reduce the

risk of fire, electric shock and personal injury including

the following.

Read all these instructions before attempting to operate

this product and save these instructions.

SAFE OPERATION

1. KEEP WORK AREA CLEAR

Cluttered areas and benches invites injuries.

2. CONSIDER WORK AREA ENVIRONMENT

Do not expose tools to rain.

Do not use tools in damp or wet locations.

Keep work area well lit.

Do not use tools in the presence of flammable

liquids or gases.

3. GUARD AGAINST ELECTRIC SHOCK

Avoid body contact with earthed or grounded

surfaces (e.g. pipes, radiators, ranges, refrigerators).

4. KEEP OTHER PERSONS AWAY

Do not let persons, especially children, not involved

in the work touch the tool or the extension cord

and keep them away from the work area.

5. STORE IDLE TOOLS

When not in use, tool should be stored in a dry

locked-up place, out of reach of children.

6. DO NOT FORCE THE TOOL

It will do the job better and safer at the rate for

which it was intended.

7. USE THE RIGHT TOOL

Do not force tools to do the job of a heavy duty

tool.

Do not use tools for purposes not intended; for

example do not use circular saws to cut tree limbs

or logs.

8. DRESS PROPERLY

Do not wear loose clothing or jewellery, they can

be caught in moving parts.

Non-skid footwear is recommended when working

outdoors.

Wear protective hair covering to contain long hair.

9. USE PROTECTIVE EQUIPMENT

Use safety glasses.

Use face or dust mask if working operations create

dust.

10. CONNECT DUST EXTRACTION EQUIPMENT

If the tool is provided for the connection of dust

extraction and collecting equipment, ensure these

are connected and properly used.

11. DO NOT ABUSE THE CORD

Never yank the cord to disconnect it from the

socket. Keep the cord away from heat, oil and

sharp edges.

12. SECURE WORK

Where possible use clamps or a vice to hold the

work. It is safer than using your hand.

GENERAL SAFETY INSTRUCTIONS

13. DO NOT OVERREACH

Keep proper footing and balance at all times.

14. MAINTAIN TOOLS WITH CARE

Keep cutting tools sharp and clean for better and

safer performance.

Follow instruction for lubricating and changing

accessories.

Inspect tool cords periodically and if damaged have

them repaired by an authorized service facility.

Inspect extension cords periodically and replace if

damaged.

Keep handles dry, clean and free from oil and

grease.

15. DISCONNECT TOOLS

When not in use, before servicing and when

changing accessories such as blades, bits and

cutters, disconnect tools from the power supply.

16. REMOVE ADJUSTING KEYS AND WRENCHES

Form the habit of checking to see that keys and

adjusting wrenches are removed from the tool

before turning it on.

17. AVOID UNINTENTIONAL STARTING

Ensure switch is in "off" position when plugging in.

18. USE OUTDOOR EXTENSION LEADS

When the tool is used outdoors, use only extension

cords intended for outdoor use and so marked.

19. STAY ALERT

Watch what you are doing, use common sense and

do not operate the tool when you are tired.

20. CHECK DAMAGED PARTS

Before further use of tool, it should be carefully

checked to determine that it will operate properly

and perform its intended function.

Check for alignment of moving parts, binding of

moving parts, breakage of parts, mounting and any

other conditions that may affect its operation.

A guard or other part that is damaged should be

properly repaired or replaced by an authorized

service centre unless otherwise indicated in this

instruction manual.

Have defective switches replaced by an authorized

service centre.

Do not use the tool if the switch does not turn it on

and off.

21. WARNING

The use of any accessory or attachment other than

one recommended in this instruction manual may

present a risk of personal injury.

22. HAVE YOUR TOOL REPAIRED BY A QUALIFIED

PERSON

This electric tool complies with the relevant safety

rules. Repairs should only be carried out by

qualified persons using original spare parts,

otherwise this may result in considerable danger to

the user.

- 4 -