ページを印刷する
5.
HEALTH AND SAFETY INFORMATION
Battery packs
–
Before charging, read the instructions.
–
Do not expose to rain.
–
Only use Draper 12V battery packs with this product. Consult your Draper stockist for details.
–
Do not charge any other batteries with Draper chargers. Any other application is considered
misuse.
–
The charger must be disconnected from the power supply before removing the battery.
–
The battery must be removed from the appliance before it is recycled.
–
The battery is to be disposed of in-line with local authority procedures.
–
Do not crush, open or burn the battery. Exposure to potentially harmful materials may occur.
–
In case of fire use CO2 or dry chemical extinguisher.
–
Do not expose to high temperatures >50°C. The battery may degrade at high temperatures.
–
Charge battery in conditions between 5°C to 30°C with the designated charger for the battery.
–
Do not use battery if it has been stored at 5°C or less. Allow it to "normalise" at room
temperature before usage/charging.
Warning! – Leaking battery packs
–
The electrolyte in battery packs is corrosive. Avoid contact with the skin.
–
If contact is made, flush the area with clean water, pat dry and seek medical attention at the
earliest opportunity.
–
Inform medical personnel that the contaminant is a "high alkaline, corrosive liquid".
–
If electrolyte comes into contact with the eyes, flush with copious amounts of water only.
Seek immediate medical attention, relaying the information above.
5.4 CONNECTION TO THE POWER SUPPLY (CHARGER)
Caution: Risk of electric shock. Do not open.
This appliance is supplied with an approved plug and cable for your safety. Never use a damaged
or incomplete plug.
This appliance is Class II† and is designed for connection to a power supply matching that detailed
on the rating label and compatible with the plug fitted.
Carefully select an extension lead. Some machines are not suitable for use with extension leads.
If the tool is designed for use outdoors, only use an extension lead suitable for that environment in
conjunction with an RCD adaptor. When using an extension lead, select one capable of handling
the current (amps) drawn by the machine in use. Ensure the cable is fully unwound regardless of
the distance between the power supply and the tool. Excess current (amps) and a coiled extension
lead will cause the cable to heat up and can result in fire.
Keep extension leads away from moving hazardous parts to avoid damages to the cable which
can lead to contact with live parts. Position cable safely to avoid tripping over.
†Double insulated
applied to the basic insulation to protect against electric shock in the event of failure of the basic
insulation.
Important! If using an extension lead, follow the instructions that came with your lead regarding
maximum load while cable is wound. If in doubt, ensure that the entire cable is unwound. Using a
coiled extension lead will generate heat which could melt the lead and cause a fire.
: This product requires no earth connection as supplementary insulation is
– 10 –