- ページ 5

電動工具 Draper Gen 2 Master KitのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Draper Gen 2 Master Kit 8 ページ。 Front hub wheel tool

SETTING THE 82mm FITTING/REMOVAL TOOL

NOTE: Grease the screw threads before

using this tool. Before using this tool

ensure that the ABS sensor has been

removed.

WARNING: Do not use impact tools

when removing.

5.1 REMOVING THE BEARING

Select a 4 long pin configuration.

Fit black half moon plates

and back pushing disc.

Assemble with a lubricated force

screw and nut.

Remove bearing by turning the nut

and force screw with 2 x spanners

(not included).

WARNING: Do not use impact tools

when installing.

5.2 INSTALLING THE PLATES

Select a 4 short pin configuration.

Fit half moon silver plates to push

against the locking ring.

WARNING: Do not push against the inner

bearing as this will overload the bearing.

Assemble with screw, nut and silver

back plate (ensuring the lip faces

the bearing) install by turning the

screw and nut with suitable spanners.

Remove all parts.

IMPORTANT: It is likely that the bearing studs

are not always pressed securely into the tool

and this may lead to the silver plates being

stuck to the bearing. In this instance, it might

be necessary to pull the stud in using a sturdy

washer and wheel nut.

FIG. 5

FIG. 6

FIG. 7