- ページ 11

ドリル Draper 56369のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Draper 56369 20 ページ。

PREPARING THE IMPACT DRILL

Note: Remove the plug from the socket before

carrying out adjustment, servicing or maintenance.

8.1 AUXILIARY HANDLE AND DEPTH

ROD – FIGS.1 – 4

Warning! Always use the auxiliary handle supplied

with the tool. Loss of control can cause personal

injury.

The auxiliary handle is intended for both right and

left-handed persons.

When fitting the auxiliary handle (9):

– Ensure the hand grip is loose (screw

anti-clockwise to loosen), before sliding it over

the drill's chuck (1) onto the collar (1.1).

– Select the required angle of the handle and

tighten the handgrip to secure.

The interior of the auxiliary handle can be used for

drill bit storage:

– To access storage, lift up the cap (10) located

on the end of the handle (fig.3).

To fit the depth rod (11):

– Ensure the depth rod adjustment knob (11.1) is

loosened (screw anti-clockwise) before sliding

the depth rod into the hole located on the

auxiliary handle assembly.

– Adjust the depth rod to the required position and

re-tighten the adjustment knob.

(9)

FIG.1

FIG.2

FIG.3

(11)

FIG.4

- 11 -

(1)

(9)

(10)

(11.1)