ページを印刷するCHD96V - CHD14V2
CHD142V Plus - CHD182V Plus
WARNING: Please ensure the Battery Pack
is installed correctly before charging.
✲✌
✳✌
✪✌ TRIGGER - When the variable speed trigger switch is depressed the chuck will
rotate (providing the direction switch is in a clockwise or anticlockwise position).
✫✌ FORWARD/REVERSE LEVER - This lever determines the direction of rotation of
the chuck, i.e. clockwise or anticlockwise.
✬✌ KEYLESS CHUCK - This is for holding tools, i.e. drill bits or screwdriver bits.
NOTE: Part No. CHD142VPLUS is fitted with auto spindle locking feature for easy
bit changing, also helps perforate through sheet steel easily if drill bit snags.
✭✌ RATING PLATE - Shows Part No., voltage, capacity, etc.
✮✌ TWO-SPEED GEARBOX SELECTOR SWITCH - This adjusts the rotation speed
range of the chuck via the two-speed gearbox. (NOTE: Only change gear when the
drill has completely stopped).
✯✌ BATTERY RELEASE - To release the battery pack, squeeze the grips located on
either side of the battery casing and carefully slide it out.
✰✌ BATTERY PACK - This is the drill's power supply.
✱✌ TORQUE CONTROL - There are 21 torque settings, settings 1-10 are normally
used for sensitive screwdriving. The 21st setting is for standard drilling
applications. (NOTE: CRD12V has 11 torque settings).
✲✌
BATTERY CHARGER - Charges the battery in approximately 1 hour.
✳✌ CHARGING INDICATOR - This will glow when the battery is charging.
✴✌ HAMMER SETTING - Select this setting for hammer drilling into
brickwork/masonry. (NOTE: CRD12V does not have this feature).
GETTING TO KNOW YOUR
CORDLESS DRILL/CHARGER
✬✌
✴✌
✱✌
✫✌
✪✌
- 7 -
✮✌
✭✌
✯✌
✰✌
FIG.B