ページを印刷するRegular inspection and cleaning reduces the
necessity for maintenance operations and will
keep your tool in good working condition. The
tool bearings and gears are life-long lubricated.
The motor must be correctly ventilated during
tool operation. For this reason avoid blocking the
air inlets with hands. After use disconnect the tool
from the power supply and clean carefully, use
compressed air through ventilation slots.
DISPOSAL
At the end of the machine's working life, or when
it can no longer be repaired, ensure that it is
disposed of according to the standard regulations
of the country in which it is being used, and that
the disposal operation is carried out by
specialized personnel following authorized
guidelines.
In all circumstances:
- Do not abandon in the environment;
- Do not dispose of together with solid urban
waste products;
- Contact the special recycling centres.
WARNING
Disconnect the plug from the power supply socket
before replacing any parts.
For a full range of optional accessories, please refer to your Draper catalogue.
MAINTENANCE &
PART REPLACEMENT
OPTIONAL ACCESSORIES
IMPORTANT:
All operations should only be performed by an
authorized person.
- 7 -