- ページ 13

ドリル Draper PT810SFのPDF インストラクションをオンラインで閲覧またはダウンロードできます。Draper PT810SF 16 ページ。 Sds+ hammer drill kit

10. MAINTENANCE

10.1 GEARBOX MAINTENANCE FIG. 6

NOTE: Remove the plug from the socket before carrying out

adjustment, servicing or maintenance.

Before each use remove the gearbox access cover

ensure there is sufficient grease. Using pin spanner

remove the access cover

top-up the gearbox (20 grams max.) using a general purpose

lithium based grease.

WARNING: Assembly must be completed prior to operating

the machine.

The hammer drill does not require any special maintenance.

Regularly clean/vacuum the ventilation slots. Use only a mild

cleaner and a damp cloth to clean the tool.

NOTE: Remove the plug from the socket before carrying out adjustment, servicing or

maintenance.

PROBLEM

Motor does not start.

For a full range of optional accessories, please refer to your local Draper Stockist.

anti-clockwise. If required

POSSIBLE CAUSE

1. Fuse.

2. Brushes worn.

3. Unsure.

FIG.6

REMEDY

1. Replace/reset 13 amp time

delay fuse or circuit

breaker.

2. Have carbon brushes

replaced in motor.

3. Return to an authorised

service agent for diagnosis.