- ページ 5

ドリル Draper STORMFORCE CDH182LISFのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Draper STORMFORCE CDH182LISF 20 ページ。 18v li-ion cordless hammer drill

INTRODUCTION

4.1 SCOPE

This cordless drill is designed for use with a variety of drill bits, intended for drilling holes in

wood, plastic, metal, brick etc. It is intended for domestic and light commercial use only.

Any other application is considered misuse.

4.2 SPECIFICATION

Stock No.............................................................................................................................. 14602

Part No. ......................................................................................................................CDH182LISF

Battery:

Type ........................................................................................................................ Li-ion

Rated Voltage ........................................................................................................... 18V

Rating ..................................................................................................................... 1.5Ah

Charger:

Rated Voltage ......................................................................................................... 230V

Rated Frequency ..................................................................................................... 50Hz

Rated Current Input ................................................................................................ 50W

Rated D.C. Output Voltage ....................................................................... 14.4~18V DC

Rated D.C. Output Current ................................................................................... 2.0Ah

Construction ......................................................................................................... Class II

Drill Capacities:

Wood ..................................................................................................................... 25mm

Mild Steel .............................................................................................................. 10mm

Masonry ................................................................................................................. 10mm

Maximum Torque .............................................................................................................. 25Nm

Revolutions Per Minute (no load) .............................................................. 0-400 / 0-1350min

Chuck Capacity ................................................................................................................. 10mm

Spindle Thread ...........................................................................................................

Sound Pressure Level .................................................................................................. 85.3dB(A)

Sound Power Level ..................................................................................................... 96.3dB(A)

Vibration Level ............................................................................................................ 10.05m/s

Weight (drill and battery) ............................................................................................... 0.86kg

4.3 HANDLING & STORAGE

Although this machine is small in size, care must still be taken when handling and lifting.

Dropping this machine will have an effect on the accuracy and may also result in personal

injury. This machine is not a toy and must be respected.

The environment will have a negative result on its operation if you are not careful. If the air

is damp, components will rust. If the machine is unprotected from dust and debris;

components will become clogged: And if not cleaned and maintained correctly or regularly

the machine will not perform at its best.

-1

⁄

x 24unf