- ページ 7
ソウ Draper 71278のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Draper 71278 12 ページ。 Metal cutting saw 185 mm
ページを印刷する
NOTE:
Remove the plug from the socket before
carrying out adjustment, servicing or
maintenance.
AUXILIARY SIDE HANDLE (Fig.1.):
Screw the auxiliary side handle (A) into the
threaded hole on the front metal housing.
BLADE FITTING AND REMOVAL
(Figs.2-4):
Remove the swarf collection box (B) by
turning handle (C) anticlockwise.
NOTE:
When removing/refitting, notice the top of
the swarf collection box slides under the
plastic housing.
To take out the inner blade cover remove the
three securing screws (D).
Raise the saw up to full height, see page 8, to
enable the inner blade guard to be dropped
down and then out.
Press down spindle lock (E) and loosen
spindle bolt (F) with spanner supplied.
NOTE:
The spindle bolt has a right hand thread: anti-
clockwise to remove.
Take note of the direction and order the
bolts, washer and flanges are removed, to
ensure correct assembly.
Fit the new blade, ensuring the tip of the
teeth are facing upwards at the front of the
saw, and observe the direction of rotation
arrows on the blade/machine match.
ASSEMBLY
Fig.1.
Fig.2.
Fig.3.
(F)
Fig.4.
- 6 -
(A)
(C)
(B)
(D)
(E)