- ページ 2

ソウ Draper 88192のPDF 使用方法をオンラインで閲覧またはダウンロードできます。Draper 88192 4 ページ。 550mm precision mitre saw
Draper 88192 にも：組み立ての詳細 (2 ページ)

PARTS DRAWING AND COMPONENTS

Vice clamp assembly.

Length stop assembly.

Cut depth stop.

Cut depth stop screws.

Base.

Base socket head screws.

Pre-set angle arm.

Pivot pin.

Cursor screw.

Cursor.

Blade tensioning nut.

Pivot screw.

Saw table.

Saw frame handle.

Saw frame guide bar carriers.

Saw blade.

Saw frame carriers.

Saw frame assembly.

90°

IMPORTANT WARNING

• After assembly, test the angles with some scrap timber to ensure the machine is assembled

correctly and cutting true.

To get the best use from this mitre saw ensure that:-

• The saw blade is tensioned sufficiently to avoid "whip" which will cause the blade to deviate

from a true cut.

• The blade is in line and central to the frame.

• The workpiece is square and true to the base casting.

• Blade tension is released after use.

• You read the instruction leaflet supplied thoroughly before use.

45°

36°

Body

30°

- 2 -

Saw and Guide Assembly

Fence and

Fence Stud

Assembly

Pivot Arm Assembly

22.5°

Clamp and

Clamp Stud

Assembly

15°