- ページ 5
ソウ Draper CSM355のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Draper CSM355 16 ページ。 355mm dry metal cutting saw
ページを印刷する
GENERAL SAFETY INSTRUCTIONS
GENERAL SAFETY INSTRUCTIONS
FOR POWER TOOLS
FOR POWER TOOLS
WARNING
WARNING
Please read the following instructions carefully, failure to do so could lead to serious personal injury.
Please read the following instructions carefully, failure to do so could lead to serious personal injury.
IMPORTANT
IMPORTANT
Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it
Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it
was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you.
was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you.
1. KNOW YOUR POWER TOOL
1. KNOW YOUR POWER TOOL
Read and understand the owner's manual and labels affixed
Read and understand the owner's manual and labels affixed
to the tool. Learn its application and limitations as well as
to the tool. Learn its application and limitations as well as
the specific potential hazards peculiar to this tool.
the specific potential hazards peculiar to this tool.
2. KEEP WORK AREA CLEAN
2. KEEP WORK AREA CLEAN
Cluttered areas and benches invite accidents. Floors must
Cluttered areas and benches invite accidents. Floors must
not be slippery due to oil or sawdust.
not be slippery due to oil or sawdust.
3. AVOID DANGEROUS ENVIRONMENTS
3. AVOID DANGEROUS ENVIRONMENTS
Do not use power tools in damp or wet locations, or expose
Do not use power tools in damp or wet locations, or expose
them to rain. Keep work area well lit. Provide adequate
them to rain. Keep work area well lit. Provide adequate
space surrounding the work area. Do not use in
space surrounding the work area. Do not use in
environments with a potentially explosive atmosphere.
environments with a potentially explosive atmosphere.
4. KEEP CHILDREN AWAY
4. KEEP CHILDREN AWAY
All visitors should be kept a safe distance from work area.
All visitors should be kept a safe distance from work area.
5. STORED TOOLS
5. STORED TOOLS
When not being used, all tools should be stored in a dry,
When not being used, all tools should be stored in a dry,
locked cupboard or out of the reach of children.
locked cupboard or out of the reach of children.
6. WEAR PROPER CLOTHING
6. WEAR PROPER CLOTHING
Do not wear loose clothing, neckties or jewellery (rings,
Do not wear loose clothing, neckties or jewellery (rings,
wristwatches) to catch in moving parts. NONSLIP footwear
wristwatches) to catch in moving parts. NONSLIP footwear
is recommended.Wear protective hair covering to contain
is recommended.Wear protective hair covering to contain
long hair. Roll long sleeves above the elbow.
long hair. Roll long sleeves above the elbow.
7. USE SAFETY GOGGLES (Head Protection)
7. USE SAFETY GOGGLES (Head Protection)
Wear CE approved safety goggles at all times. Normal
Wear CE approved safety goggles at all times. Normal
spectacles only have impact resistant lenses, they are NOT
spectacles only have impact resistant lenses, they are NOT
safety glasses. Also, use face or dust mask if application is
safety glasses. Also, use face or dust mask if application is
dusty and ear protectors (plugs or muffs) during extended
dusty and ear protectors (plugs or muffs) during extended
periods of operation.
periods of operation.
8. NOISE LEVELS
8. NOISE LEVELS
Some types of machines may have high noise levels when
Some types of machines may have high noise levels when
working. In such cases ear protection must be worn.
working. In such cases ear protection must be worn.
9. VIBRATION LEVELS
9. VIBRATION LEVELS
Hand held power tools produce different vibration levels.
Hand held power tools produce different vibration levels.
You should always refer to the specifications and relevant
You should always refer to the specifications and relevant
Health and Safety guide.
Health and Safety guide.
10. DUST EXTRACTION
10. DUST EXTRACTION
If your tool is fitted with a dust extraction fitting, always
If your tool is fitted with a dust extraction fitting, always
ensure that it is connected and being used with a dust
ensure that it is connected and being used with a dust
extractor.Vacuum cleaners can be used if suitable for the
extractor.Vacuum cleaners can be used if suitable for the
material being extracted.
material being extracted.
11. PROTECT YOURSELF FROM ELECTRIC SHOCK
11. PROTECT YOURSELF FROM ELECTRIC SHOCK
When working with power tools, avoid contact with any
When working with power tools, avoid contact with any
earthed items (e.g. pipes, radiators, hobs and refrigerators,
earthed items (e.g. pipes, radiators, hobs and refrigerators,
etc.). If you are using a power tool in extreme conditions
etc.). If you are using a power tool in extreme conditions
(e.g. high humidity or generating metal dust), always use an
(e.g. high humidity or generating metal dust), always use an
RCD (residual current device) at the power socket.
RCD (residual current device) at the power socket.
12. STAY ALERT
12. STAY ALERT
Always watch what you are doing and use common sense.
Always watch what you are doing and use common sense.
Do not operate a power tool when you are tired or under
Do not operate a power tool when you are tired or under
the influence of alcohol or drugs.
the influence of alcohol or drugs.
13. WHEN WORKING OUT OF DOORS
13. WHEN WORKING OUT OF DOORS
Only use extension leads designed for that purpose.
Only use extension leads designed for that purpose.
14. ACCESS TO MAINS SOCKET
14. ACCESS TO MAINS SOCKET
If a stationary machine is fitted with a moulded plug and
If a stationary machine is fitted with a moulded plug and
cable, the machine should not be positioned so that access
cable, the machine should not be positioned so that access
to the mains socket is restricted.
to the mains socket is restricted.
IMPORTANT NOTE
IMPORTANT NOTE
Residual Risk. Although the safety instructions and operating manuals for our tools contain extensive instructions on safe
Residual Risk. Although the safety instructions and operating manuals for our tools contain extensive instructions on safe
working with power tools, every power tool involves a certain residual risk which can not be completely excluded by safety
working with power tools, every power tool involves a certain residual risk which can not be completely excluded by safety
mechanisms. Power tools must therefore always be operated with caution !
mechanisms. Power tools must therefore always be operated with caution !
15. DISCONNECT POWER TO THE TOOL
15. DISCONNECT POWER TO THE TOOL
When not in use, before servicing and when changing
When not in use, before servicing and when changing
accessories such as cutters, etc.
accessories such as cutters, etc.
16. AVOID ACCIDENTAL STARTING
16. AVOID ACCIDENTAL STARTING
Make sure the switch is in the OFF position before plugging
Make sure the switch is in the OFF position before plugging
the machine into the power supply.
the machine into the power supply.
17. NEVER LEAVE MACHINE RUNNING UNATTENDED
17. NEVER LEAVE MACHINE RUNNING UNATTENDED
Turn power off. Do not leave machine until it comes to a
Turn power off. Do not leave machine until it comes to a
complete stop.
complete stop.
18. DO NOT ABUSE THE CORD
18. DO NOT ABUSE THE CORD
Never carry the tool by the power cable or pull it from
Never carry the tool by the power cable or pull it from
the socket. Keep the power cable away from heat, oil and
the socket. Keep the power cable away from heat, oil and
sharp edges.
sharp edges.
19. NEVER STAND ON TOOL
19. NEVER STAND ON TOOL
Serious injury could occur if the tool is tipped or if the
Serious injury could occur if the tool is tipped or if the
cutting tool is accidentally contacted. Do not store materials
cutting tool is accidentally contacted. Do not store materials
above or near the tool, so that it is necessary to stand on the
above or near the tool, so that it is necessary to stand on the
tool to reach them.
tool to reach them.
20. CHECK DAMAGED PARTS
20. CHECK DAMAGED PARTS
Check for damage to parts, breakage of parts, mountings
Check for damage to parts, breakage of parts, mountings
and any other conditions that may affect its operation.
and any other conditions that may affect its operation.
A guard or other part that is damaged should be properly
A guard or other part that is damaged should be properly
repaired or replaced.
repaired or replaced.
21. KEEP GUARDS IN PLACE
21. KEEP GUARDS IN PLACE
And in working order.
And in working order.
22. MAINTAIN TOOLS WITH CARE
22. MAINTAIN TOOLS WITH CARE
Keep tools sharp and clean for the best and safest
Keep tools sharp and clean for the best and safest
performance. Follow instructions for lubricating and
performance. Follow instructions for lubricating and
changing accessories. All extension cables must be
changing accessories. All extension cables must be
checked at regular intervals and replaced if damaged.
checked at regular intervals and replaced if damaged.
Always keep the hand grips on the tool clean, dry and free
Always keep the hand grips on the tool clean, dry and free
of oil and grease.
of oil and grease.
23. USE RECOMMENDED ACCESSORIES
23. USE RECOMMENDED ACCESSORIES
Consult the owners manual for recommended accessories.
Consult the owners manual for recommended accessories.
Follow the instructions that accompany the accessories.
Follow the instructions that accompany the accessories.
The use of improper accessories may cause hazards.
The use of improper accessories may cause hazards.
24. REMOVE ADJUSTING KEYS AND WRENCHES
24. REMOVE ADJUSTING KEYS AND WRENCHES
Form a habit of checking to see that keys and adjusting
Form a habit of checking to see that keys and adjusting
wrenches are removed from the tool before turning it on.
wrenches are removed from the tool before turning it on.
25. SECURE WORK
25. SECURE WORK
Use clamps or a vice to hold work. This frees both hands to
Use clamps or a vice to hold work. This frees both hands to
operate the tool.
operate the tool.
26. DO NOT OVERREACH
26. DO NOT OVERREACH
Keep proper footing and balance at all times.
Keep proper footing and balance at all times.
27. USE RIGHT TOOL
27. USE RIGHT TOOL
Do not force the tool or attachment to do a job for which it
Do not force the tool or attachment to do a job for which it
was not designed.
was not designed.
28. DO NOT FORCE TOOL
28. DO NOT FORCE TOOL
It will do the job better and safer at the rate for which it
It will do the job better and safer at the rate for which it
was designed.
was designed.
29. DIRECTION OF FEED
29. DIRECTION OF FEED
Feed work into a blade or cutter against the direction of
Feed work into a blade or cutter against the direction of
rotation of the blade or cutter only.
rotation of the blade or cutter only.
30. WHEN DRILLING OR SCREWING INTO WALLS
30. WHEN DRILLING OR SCREWING INTO WALLS
Always make sure there is no danger of hitting any hidden
Always make sure there is no danger of hitting any hidden
power cables, water or gas pipes in the wall.
power cables, water or gas pipes in the wall.
- 4 -