- ページ 3

コントロールユニット Advanced Energy Thyro-PX AnybusのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Advanced Energy Thyro-PX Anybus 13 ページ。 Ethernet ip module

Advanced Energy

Table 3. Link/activity LED (Continued)

LED State

Green

Green, flickering

Yellow

Yellow, flickering

Table 4. RJ-45 Ethernet pinout

4, 5, 7, 8

Housing

CONFIGURING PROCESS CONTROL SOFTWARE

The Electronic Description Sheet (EDS) file contains information about the capabilities of the unit,

which can be used to configure the process control software. Download the current EDS file from the

AE website http://www.advanced-energy.com/en/Anybus_modules_ThyroPX.html.

Install the EDS file in the process control software.

CONFIGURING WITH THYRO-TOOL PRO PC

SOFTWARE

You can configure the Thyro-PX power controller using either the Thyro-Tool Pro PC software or the

Thyro‑Touch display.

To configure the unit, you will:

• Adapt the Thyro-PX hardware configuration

If required, you can also:

• Select the configuration

• Configure the diagnostics

57010163-00A

100 Mbit/s link established

100 Mbit/s activity

10 Mbit/s link established

10 Mbit/s activity

TD+

TX-

RX+

RX-

Normally left unused; to ensure signal integrity, these pins are tied

together and terminated to PE via a filter circuit in the module.

Cable shield

Thyro-PX

Description

™

Anybus

Ethernet IP

™

Thyro-PX

Anybus

Ethernet IP