- ページ 7

サンダー Draper 230V Grass TrimmerのPDF インストラクションをオンラインで閲覧またはダウンロードできます。Draper 230V Grass Trimmer 18 ページ。 Electric stapler/nailer
Draper 230V Grass Trimmer にも：取扱説明書 (16 ページ), インストラクション (16 ページ), インストラクション (16 ページ), インストラクション (20 ページ)

ページを印刷する

HEALTH & SAFETY INFORMATION

5.4 POWER TOOL USE AND CARE

a. Do not force the power tool. Use the

correct power tool for your application.

The correct power tool will do the job

better and safer at the rate for which it

was designed.

b. Do not use the power tool if the switch

does not turn it on and off. Any power

tool that cannot be controlled with the

switch is dangerous and must be

repaired.

c. Disconnect the plug from the power

source before making any adjustments,

changing accessories, or storing power

tools. Such preventive safety measures

reduce the risk of starting the power

tool accidentally.

d. Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands

of untrained users.

e. Maintain power tools. Check for

misalignment or binding of moving

parts, breakage of parts and any other

condition that may affect the power

tools operation. If damaged, have the

power tool repaired before use. Many

accidents are caused by poorly

maintained power tools.

f. Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likely to bind

and are easier to control.

g. Use the power tool, accessories and tool

bits etc., in accordance with these

instructions and in the manner intended

for the particular type of power tool,

taking into account the working

conditions and the work to be

performed. Use of the power tool for

operations different from intended

could result in a hazardous situation.

5.5 SERVICE

a. Have your power tool serviced by a

qualified repair person using only

identical replacement parts. This will

ensure that the safety of the power tool

is maintained.

5.6 CONNECTION TO THE POWER

SUPPLY

Make sure the power supply information on

the machine's rating plate are compatible

with the power supply you intend to

connect it to.

This lathe comes supplied with a UK

standard 3 pin plug fitted. It is designed for

connection to a domestic power supply

rated at 230V AC.

Because it is constructed mostly of metal

parts, it is a Class 1 machine; meaning, it

must have an earth connection in the power

supply. This is to prevent electrocution in

the event of a failure.

Apart from replacing the fuse in the plug,

no other electrical work is recommended on

this palm screwdriver.