- ページ 6

サンダー Draper 53016のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Draper 53016 16 ページ。 230v 1200w angle polisher

HEALTH & SAFETY INFORMATION

5.1 GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE

When using any type of power tool there are steps that should be taken to make sure that

you, as the user, remain safe.

Common sense and a respect for the tool will help reduce the risk of injury.

Read the instruction manual fully. Do not attempt any operation until you have read and

understood this manual.

Most important you must know how to safely start and stop this machine, especially in an

emergency.

Keep the work area tidy and clean. Attempting to clear clutter from around the machine

during use will reduce your concentration. Mess on the floor creates a trip hazard. Any

liquid spilt on the floor could result in you slipping.

Find a suitable location. If the machine is bench mounted; the location should provide good

natural light or artificial lighting as a replacement. Avoid damp and dust locations as it will

have a negative effect on the machine's performance.

If the machine is portable; do not expose the tool to rain. In all cases do not operate power

tools near any flammable materials.

Beware of electric shock. Avoid contact with earthed surfaces; because they can conduct

electricity if there is an electrical fault with the power tool. Always protect the power cable

and route it away from danger.

Keep bystanders away. Children, onlookers and passers by must be restricted from entering

the work area for their own protection. The barrier must extend a suitable distance from the

tool user.

Unplug and house all power tools that are not in use. A power tool should never be left

unattended while connected to the power supply. They must be housed in a suitable

location, away locked up and from children.

Do not overload or misuse the tool. All tools are designed for a purpose and are limited to

what they are capable of doing. Do not attempt to use a power tool (or adapt it in any way)

for an application it is not designed for. Select a tool appropriate for the size of the job.

Overloading a tool will result in tool failure and user injury: This covers the use of

accessories.

Dress properly. Loose clothing, long hair and jewellery are all dangerous because they can

become entangled in moving machinery: This can also result in parts of body being pulled

into the machine.

Clothing should be close fitted, with any long hair tired back and jewellery and neck ties

removed. Footwear must be fully enclosed and have a nonslip sole.