- ページ 3
ラボラトリー機器 Drawell LBI-375A-NのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Drawell LBI-375A-N 16 ページ。
ページを印刷するThanks for purchasing the equipment, please carefully read the manual before operating.
I:Precautions
1)
After the equipment is in place, lock the front casters to make the chamber stable.
2)
To protect the compressor, pls turn on the instrument after 48 hours when placed.
3)
Connect the 220V / 50Hz power supply, and the power socket should be reliably
grounded.
4)
The device should be placed in a place that is protected from sunlight, cool and
ventilated. The distance between the device and the wall must be more than 10 cm.
Handle with care, the angle with the ground level should not be less than 45 °.
5)
In order to maintain the good appearance of the equipment, pls do not wipe the
machine surface with acid or alkali or corrosive substances.The inside and outside of the
instrument can be regularly cleaned with dry cloth.
6)
In order to obtain good working performance of the equipment, the difference
between the working temperature and the environment should not be too large, and the
ambient temperature should preferably be (20 ± 5) ℃.
7)
Fuse is installed at the back of the control box for this equipment. If the equipment
is not powered, please check whether the fuse tube is intact. please cut off the power
before checking and replacing the fuse tube and replace the same type and
specifications!
8)
Fans are installed in the operation room. Don't insert your fingers or objects into
the fan cover to avoid safety accidents and damage to the fan .Please cut off the power
before changing the fan.
9)
Stop using ,please turn off the power switch.
10)
Do not store flammable or explosive materials or hazardous materials in the
3