- ページ 6
トラクター BCS 92193040のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。BCS 92193040 10 ページ。 Buddy cart
ページを印刷する6
Slide axle completely through undercarriage. Align tongue with the front support
7
Slide axle completely through undercarriage. Align drawbar with the
and pull handle to latch. Attach washers and spacers as shown.
front support and pull handle to latch. Attach washers and spacers as shown.
* NOTE: TIGHTEN
ALL HARDWARE
AT THIS TIME
7
8
Slide wheels and washers onto axle and secure with hairpins as shown.
Slide wheels and washers onto axle and secure with hairpins as shown.
Slide wheels and washers onto axle and secure with hairpins as
ch latch angle to drawbar assembly with supplied
CHECK TIRE PRESSURE:
30 PSI
9
8
Install hitch bolt and nut to secure to attachment drop hitch.
Install hitch bolt, washer and nut to secure attachment to drop hitch.
The attachment can be secured to the drop hitch in one position only.
Install hitch bolt and nut to secure to attachment drop hitch.
6000030 Drop Hitch
WRONG!
5
Assembly Instructions
Assembly Instructions
Assembly Instructions
Slide axle completely through undercarriage. Align drawbar with
front support and pull handle to latch. Attach washers and spac
Slide wheels and washers onto axle and secure with hairpins as
* NOTE: LOOSELY TIGHTEN
BOLTS AT THIS TIME
Install hitch pin and hairpin to secure to attachment vehicle.
Install hitch bolt and nut to secure to attachment drop hitch.
Install hitch bolt and nut to secure to attachment drop hitch.
23
24
WRONG!
5
6000030 Drop Hitch
1-800-543-1040
19
20
25
5
Attach latch angle to drawbar assembly with supplied
hardware as shown
29
31
6000030 Drop Hitch
Assembly Step 8
33
32
5
bcsamerica.com
5
the
ers as shown.
shown.
shown.
* NOTE: MAKE SURE
VALVE STEM IS
FACING OUT
* NOTE: MAKE SURE
VALVE STEM IS
FACING OUT
24
10
34
24
7
10
7
8
Assembly Step 7
5
Attach latch angle to drawbar assembly with supplied
hardware as shown
5
Assembly Step 8
6
Insert axle into und
Attach spacer, draw
10
10
12
12
Assembly Step 6
5
Attach latch angle to
hardware as shown
Assembly Step 8