- ページ 10

顕微鏡 Drawell SMART-e SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Drawell SMART-e Series 16 ページ。

5 . Image System Operation

This product is equipped with various camera device, such as CMOS digital cameras, CCD camera and

VGA camera device etc, corresponding image output devices using the computer, LCD. And can choose by

0.5X or 1X optics cameras.

（1）Adaptor for Digital Camera

To CMOS digital cameras, for example, remove USB2.0 connection lines, insert the square plug in USB2.0

behind the Integrative trinocular head, insert another flat plug in USB2.0 , make sure solid and stable.

○

（2）Use Of Camera Device

After the connection, open image display equipment (such as computer and start image collector & analysis

software). Adjust microscope, adjust the eyepiece until clear image. Then open software to browse image

collector function, clear or basic clear image should also be on the screen (if isn't satisfied only slightly

rotating J、N micro focusing hand wheel）, until get satisfactory imaging results.

Then can browse through the image acquisition software mode, or take images from the screen directly

observed

▲ The product has passed factory inspection that eyepiece observation and photographic camera device

adopt with synchronous size. General adjustment synchronous with eyepiece fixed diopter (only for

model with single diopter adjusting ), but also result in slight error because the difference of the vision,

can be adjusted depending on eyepiece diopter adjusting ring as benchmark. With double depending on

the degree of adjustment, please circle one "0" scale line for the datum is conducted on the basis of

regulating use.

Picture

-８-

Through

USB

transmittocomputer.

Integrative

Trinocular

Head