- ページ 12

顕微鏡 Drawell SMART-e-500のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Drawell SMART-e-500 16 ページ。

6.3.2 Replacement of LED

(1) Turn off

L, and pull out power wire from ⑨ ， make sure

external source is cut off.

(2) Refer to the procedure about replacement of halogen,

(different lamp socket with different illumination).pull out

lamp socket and replace new LED.

(3) Restore the instrument in the reverse order, then clean the

working table for normal work .

6.4 Replacement of fuse

(1) First cut off power of microscope, and pull out the power plug.

(2) Take off fuse base in the back of base ⑨, take out old fuse.

(3) Replace a new fuse with same size, then plug fuse base in ⑨.

6.5 When not in use

(1) Please cut off power when instrument not in use, put on dust cover and place in a dry and cool

environment.

(2) Suggest to place eyepiece ,objective in the dry containers (such as moisture-proof cylinder), and place

desiccant.

▲ To maintain the instrument's performance, suggest to instrument check regularly. If any trouble need to

repair, please contact with the manufacturer or dealer

-１０-