0.4 The Injury from Materials
1 Do not pump oxygen(>21% oxygen concentration)
2 Please make sure the pumped gas is mutual consistency with the pump,to avoid any chemical reaction
3 Do not pump the toxic,radiation or spontaneous combustible materials
4
If the pump have pumped the toxic gas, please wear the safety equipment before open the exhaust port, and
please also mention it before sending it to maintenance department.
5
Please make sure the cleanser is mutual consistency with the pump and do not leave any cleanser inside the
pump when washing the pump, to avoid any chemical reaction
0.5 Explosion Hazard
1 Do not operate in the explosion endangered area
2 Do not pump flammable and explosive gas
0.6 Noise Hazard
TSVP® T SERIES VACUUM PUMP
1 the Noise level of
protective equipment if needed.
0.7 Risk of Pump Damage
1 Please make sure the safety motor connection, refer to the chapters about how to connect the circuit
2
Do not pump the gas contains some dust or viscosity residue. Or if you have to, please contact with us to get
some professional advises.
3
The exhaust line should preferably be installed with a downward slope so as to prevent condensate from
flowing back into the pump and contaminating the oil. Please periodically drain the condensed oil in the exhaust
pipe from avoiding of exhaust pipe block. If the exhaust line has an upward slope, please install a condensate trap
4 Please make sure to avoid any dust or fluid inside the pump
0 SAFETY INSTRUCTION
is less than 60db(A), please wear some
5