- ページ 12

ページを印刷する

1. Starting Operation

OBJ_BUCH-412-001.book Page 31 Thursday, April 3, 2008 3:18 PM

Declaration of Conformity

We declare under our sole responsibility that

the product described under "Technical Data" is

in conformity with the following standards or

standardization documents: EN 60745 accord-

ing to the provisions of the directives

2004/108/EC, 98/37/EC (until Dec. 28, 2009),

2006/42/EC (from Dec. 29, 2009 on).

Technical file at:

Robert Bosch GmbH, PT/ESC,

D-70745 Leinfelden-Echterdingen

Dr. Egbert Schneider

Dr. Eckerhard Strötgen

Senior Vice President

Head of Product

Engineering

Certification

17.03.2008, Robert Bosch GmbH, Power Tools Division

D-70745 Leinfelden-Echterdingen

Assembly

Delivery Scope

ANGLE EXACT 2 | 3 | 6 | 7 | 8 | 15 | 17 | 23 | 30

This industrial cordless angle wrenches are sup-

plied without application tools, angle head,

straight head, Ni-Cd battery pack, charger, con-

stant voltage regulator or voltage adapter. The

voltage adapters are to be used exclusively for

connection of Bosch industrial cordless angle

wrenches to the 4EXACT constant voltage regu-

lator.

ANGLE EXACT 14CF | 22CF | 29CF

These industrial cordless angle wrenches are

supplied without application tools, flat drive,

straight head, intermediate flange, Ni-Cd bat-

tery pack, charger, constant voltage regulator or

voltage adapter. The voltage adapters are to be

used exclusively for connection of Bosch indus-

trial cordless angle wrenches to the 4EXACT

constant voltage regulator.

Bosch Power Tools

ANGLE EXACT 7 – 900 | 10 – 650 | 14 – 420

These industrial cordless angle wrenches are

supplied without application tools, angled drive

head, straight drive head, Ni-Cd battery pack

and charger.

These power tools are not suitable for operation

with constant voltage regulator.

ANGLE EXACT 25 – 250 | 30 – 380 | 40 – 280 |

50 – 210

This industrial cordless angle wrenches are sup-

plied with angle head, but without application

tools, Ni-Cd battery pack and charger. These

power tools are not suitable for operation with

constant voltage regulator.

Operating and Storage Environment

The device is suitable exclusively for oper-

ation at enclosed work sites. For trouble-

free operation of the device, the allowed

ambient temperature should lie between – 5 °C

and +50 °C (23 °F and 122 °F) at an allowed

relative humidity of between 20 and 95 %, free

of dew.

In order to avoid damage to the battery cells,

the battery pack should be stored within a tem-

perature range between 0 °C (32 °F) and 45 °C

(113 °F).

Mounting the Angled Screw Head

ANGLE EXACT 2 | 3 | 6 | 7 | 7 – 900 | 8 |

10 – 650 | 14 – 420 | 15 | 17 |

23 | 30

On these industrial cordless angle wrenches, a

fitting angled screw head (see "Angled drive

head", page 30) has to be mounted first.

Make sure that the rotational direction

switch is in the middle position (switch-on

lock) or that the battery pack has been re-

moved from the power tool before mount-

ing a screw head, adjusting or dismounting.

Hold the power tool with the open-end spanner 6

by the spanner flats 5 of the angled head flange.

Never clamp the tool by the housing shells!

English | 31

3 609 929 B34 | (3.4.08)