- ページ 7

オーブン Bosch 6 SeriesのPDF ご利用案内をオンラインで閲覧またはダウンロードできます。Bosch 6 Series 16 ページ。 2 door top freezer, inox-easyclean
Bosch 6 Series にも: ユーザーマニュアル (24 ページ), 取付・使用説明書 (20 ページ), 取付・使用説明書 (20 ページ), 取付・使用説明書 (20 ページ), 取扱説明書および取付説明書 (48 ページ), 取扱説明書 (16 ページ), 取扱説明書 (48 ページ), 取付説明書 (27 ページ), 取扱説明書 (12 ページ), 据付・取扱説明書 (36 ページ), 取扱説明書 (16 ページ), 取付・使用説明書 (16 ページ), 取扱説明書 (29 ページ), ユーザーマニュアルと設置手順 (16 ページ), ご利用案内 (32 ページ), クイック・リファレンス・マニュアル (2 ページ), クイック・リファレンス・マニュアル (2 ページ), ご利用案内 (28 ページ), ユーザーマニュアル (23 ページ), 取扱説明書 (24 ページ), 取付説明書および使用説明書 (24 ページ), ユーザーマニュアル (36 ページ), ユーザーマニュアル (32 ページ), ユーザーマニュアル (28 ページ), ユーザーマニュアル (28 ページ), 取扱説明書 (28 ページ), ご利用案内 (20 ページ), 取扱説明書 (28 ページ)

Bosch 6 Series ご利用案内
¡ With multi-circuit hotplates, the heating of the hot-
plate and the activated areas may switch on or off
at different times.
Reasons:
– Easily damaged components are protected
against overheating.
– The appliance is protected against electrical
overload.
– This achieves a better cooking result.
5  Basic operation
5.1 Switching the hob on or off
The main switch is used to switch the hob on and off.
If you switch the appliance back on again within
4 seconds after switching off, the hob will start up with
the previously stored settings.
5.2 Switching on the hob
Touch
​ ⁠ .
a The light bar above
a The displays for the controls and the heat setting
displays ​ ⁠ light up.
a The hob is ready for use.
5.3 Switching off the hob
The hob will switch off automatically when all hotplates
have been switched off for a while (10-60 seconds).
Touch
​ ⁠ .
a The indicator lamp above
a The displays go out.
a All hotplates are switched off.
a The residual heat indicator remains on until the hot-
plates have cooled down sufficiently.
5.4 Setting the hotplates
To set a hotplate, it has to be selected.
Select the required heat setting on the control panel.
Heat setting
1
Lowest setting
9
Highest setting
.
Every heat setting has an intermediate
setting, e.g. 4. .
5.5 Selecting heat settings
Requirement: The hob is switched on.
Select the hotplate with
1.
​ ⁠ lights up in the heat setting indicator. ​ ⁠ lights up
a
under the heat setting indicator.
​ ⁠ lights up brightly.
​ ⁠ goes out.
​ ⁠ .
4.5 Residual heat indicator
The hob has a two-stage residual heat indicator for
each hotplate. Do not touch the hotplate while the re-
sidual heat indicator is lit up.
Display
Meaning
The hotplate is so hot that you can
keep small dishes warm or melt cook-
ing chocolate.
The hotplate is hot.
Select a heat setting on the control panel.
2.
2
3
4
5
5.6 Changing heat settings
Select the hotplate with
1.
Select a heat setting on the control panel.
2.
5.7 Switching off the hotplate
Select the hotplate with
1.
Select 0 on the control panel.
2.
a If you have switched off a hotplate, the residual heat
indicator appears after approx. 10 seconds.
Note: The hotplate last selected remains activated. You
can adjust the hotplate without selecting it again.
5.8 Recommended cooking settings
You can find an overview of different foods with appro-
priate power levels here.
The cooking time varies depending on the type, weight,
thickness and quality of the food. The ongoing power
level depends on the cookware used.
Cooking tips
¡ To bring food to the boil, use heat setting 9.
¡ Stir thick liquids occasionally.
¡ Food that needs to be seared quickly or that initially
loses a lot of liquid during frying should be fried in
small portions.
¡ Tips for saving energy when cooking. → Page 5
Basic operation en
6
2
3
4
5
​ ⁠ .
​ ⁠ .
7