- ページ 6
ネットワーク・ルーター Draytek Vigor 2600 VGSTのPDF セルフインストールマニュアルをオンラインで閲覧またはダウンロードできます。Draytek Vigor 2600 VGST 10 ページ。 Dsl router
ページを印刷する
If you have a suitable socket, from which the
connector can be pulled out, follow the steps
below:
1. Pull out the cable from the socket and plug it
into the splitter port labelled PHONE.
2. Use the separate cable included in the
installation package (both connectors are
identical – RJ 11) to connect the telephone
socket with the splitter using the connector
labelled LINE.
10
> Self-Installation Guide
3. Use the other cable (with connectors of
different sizes), to connect DSL router
DrayTek Vigor 2600 VGST with the splitter.
Plug the bigger connector of the cable into
the larger port on the back of the DSL router
labelled ADSL; plug the smaller connector of
the cable in the splitter port labelled DSL.
4. Proceed with the DSL router installation by
following the instructions on page 14.
If your telephone socket is unsuitable (it has
a different connector) and the connecting
cable cannot be pulled out, however your NT
has a line–in jack that can be plugged out
(suitable NT – see figure on page 9), follow
the steps below:
1. Pull out the NT line cable from the socket and
plug it into the splitter port labelled LINE.
> DSL router DrayTek Vigor 2600 VGST
11