- ページ 10

オーブン Bosch Benchmark SeriesのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Bosch Benchmark Series 36 ページ。 Built-in wall ovens
Bosch Benchmark Series にも：インストレーション・マニュアル (32 ページ), クイック・リファレンス・マニュアル (4 ページ), サービスマニュアル (45 ページ), 取付説明書 (40 ページ), クイック・スタートと安全マニュアル (13 ページ)

ページを印刷する

58300000187895 ARA EN A

be entered by the customer from the Customer Settings menu to raise

or lower the cavity temperature during operation in modes other than

Broil, Convection Broil, Warm, Pizza or Self-clean.

The allowable Offset range is from 0°F to 35°F, positive or negative.

1. Press Settings to access the Customer Settings menu (from

stand-by mode only)

2. Press 9 for Temperature Offset.

3. Press Enter to edit the current setting.

4. Press (-) or (+) then enter the offset value using the numeric

keys - always enter the value as 2 digits (i.e, 05).

The new value is saved when the display changes from edit

mode back to display mode.

5. Press Clear On/Off to exit the Settings menu.

Example: A +25° offset will result in a cavity temperature of 350°

when the cooking temperature is set to 325° for any of the cooking

modes affected by the Offset. Similarly, a -25° offset will result in a

cavity temperature of 300° when the cooking temperature is set to

325°.

The adjusted temperature cannot be less than the minimum allowable

temperature for the cooking mode, nor higher than the maximum for

the cooking mode. See Allowable Operating Range by Cooking Mode

section.

4.3

Cooling Fan

The cooling fan is used to maintain allowable temperatures on internal

components and customer-accessible surfaces.

The cooling fan turns on low speed immediately at the start of a

cooking mode. The fan will continue to run for 15 minutes after the

mode has been cancelled.

This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.

MAY 2015

During Self-clean, the fan turns on high speed immediately at the start

of the cycle and will continue running for 15 minutes after the door

unlocks (@255°C/491°F).

1901 Main St ▪ Suite 600 ▪ Irvine, CA 92614

Service Manual for Bosch Benchmark Series Induction Slide-in Ranges

Page 10 of 36

800 944-2904