- ページ 25

オーブン Bosch Benchmark SeriesのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Bosch Benchmark Series 36 ページ。 Built-in wall ovens
Bosch Benchmark Series にも：インストレーション・マニュアル (32 ページ), クイック・リファレンス・マニュアル (4 ページ), サービスマニュアル (45 ページ), 取付説明書 (40 ページ), クイック・スタートと安全マニュアル (13 ページ)

ページを印刷する

58300000187895 ARA EN A

8. Secure the new fan to the fan mounting bracket, attach the

wires and reassemble.

9. Restore power to the unit and test operation.

10. Reinstall housing cover(s).

11. Slide the range back into the cutout, being sure to engage the

anti-tip bracket.

7.12

Hinge Receivers

To replace the hinge receivers, the range must be pulled out of

the cutout to provide access to the side panel(s).

7.12.1 Replacing the Hinge Receivers

1. Remove power to the range.

2. Remove the oven door (see Removing and Reinstalling the

Door).

3. Carefully slide the range out of the cutout to gain access to the

side panels.

4. Remove the finished side wall panel.

5. Remove the inner side wall bracket.

6. Remove the side housing cover.

7. From the front of the range, remove the two screws securing

the hinge receiver to the range.

8. Pull back the side insulation to reveal the hinge receiver and

remove the part.

This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.

MAY 2015

Figure 28 Removing the RH hinge receiver

9. Install the new hinge receiver.

10. Reinstall the oven door and test door operation.

11. Reinstall the side housing cover, the side wall bracket and the

finished side wall panel.

12. Restore power, and test operation.

13. Slide the range back into the cutout, being sure to engage the

anti-tip bracket.

1901 Main St ▪ Suite 600 ▪ Irvine, CA 92614

Service Manual for Bosch Benchmark Series Induction Slide-in Ranges

Page 25 of 36

800 944-2904