- ページ 7

オーブン Bosch Benchmark Series NETP066SUCのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Bosch Benchmark Series NETP066SUC 24 ページ。 Electric cooktop autochef
Bosch Benchmark Series NETP066SUC にも：パンフレット＆スペック (3 ページ), クイック・リファレンス・マニュアル (2 ページ)

ページを印刷する

Electrical Installation

Electrical Requirements

You can find the identification plate with the electrical

specifications on the underside of the appliance. The

junctionbox must be located within 3 feet of the cooktop

connection. It should be easily accessible for service

purposes.

Power supply

Model

240 V AC, 60 Hz

system: circuit

breaker

NETP666SUC 40 Amp

NETP066SUC 40 Amp

NET8666UC

40 Amp

NET8066UC

40 Amp

NET8666SUC 40 Amp

NET8066SUC 40 Amp

NEM5666UC

40 Amp

NEM5066UC

30 Amp

Connect Electrical Supply

The electrical power supply system should be a 1-phase,

3-wire system with ground connection. Install suitable

junction box (not furnished). An appropriately-sized, UL-

listed conduit connector must be used to correctly attach

the conduit to the junction box.

The branch-circuit breakers ampacity, the wire sizes and

the connections must be conform to the requirements of

the National Electrical Code or Canadian Electrical Code

and all local codes and ordinances.

Attach flexible conduit to the junction box.

Connect the cooktop lead wires to the junction box

supply wires in proper phase:

black (L1) to black

red (L2) to red

208 V AC, 60 Hz

system: circuit

blank copper wire to ground

breaker

Check the Installation

40 Amp

30 Amp

40 Amp

30 Amp

40 Amp

Remove everything from the cooktop surface including

30 Amp

stickers. Clean cooktop surface with cooktop cleaning

creme.

Switch on the circuit breaker.

Verify that elements function properly.

WARNING

Before installing, turn off at the service panel. Lock

service panel to prevent power from being turned

on accidentally.

WARNING

To reduce the risk of electric shock and fire, do not

use a flexible power supply cord.

CAUTION

Before you plug in an electrical cord or turn on

power supply, make sure all controls are in the OFF

position.