- ページ 4

ネットワーク・ルーター Draytek Vigor 2710eのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Draytek Vigor 2710e 8 ページ。 Adsl2/2+

LAN 1 - 4

Installing Your Router

This section will guide you to install the router through hardware

connection and configure the router's settings through web browser.

Before starting to configure the router, you have to connect your devices

correctly.

1. Connect the DSL interface to the MODEM port of external ADSL splitter with an

ADSL line cable.

2. Connect the LAN port to your computer with a RJ-45 cable.

3. Connect one end of the power adapter to the Power port of this device. Connect the

other end to the wall outlet of electricity.

4. Power on the router.

5. Check the POWER, ACT, LAN, DSL and INTERNET LEDs to assure network

connections.

2+.

Connecter for local network devices.

ON/OFF: Power switch.

PWR: Connecter for a power adapter.

Restore the default settings. Usage: Turn on the router.

Press the button and keep for more than 10 seconds.

Then the router will restart with the factory default

configuration.