- ページ 16
オーブン Bosch CDG634B 3W SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Bosch CDG634B 3W Series 36 ページ。
ページを印刷するDishes
en
Setting the timer
The timer runs alongside other settings. You can set it
at any time, even if the appliance is switched off. It has
its own audible signal so that you can tell whether it is
the timer or a cooking time which has elapsed.
Adjusting settings
The timer duration always starts at zero minutes.
The higher the value, the greater the time steps when
setting the timer.
The maximum setting is 24 hours.
Touch the t field.
1.
The symbol lights up red. On the display, the timer
duration is shown in white and in focus.
Set the timer duration using the rotary selector.
2.
Press the t field to start.
3.
After a few seconds, the timer also starts
Note:
automatically.
The timer duration counts down.
The timer remains visible on the display if the appliance
is switched off. When an operation is running, the
settings for this operation are shown in the foreground.
When you touch the t field, the timer duration is
displayed for a few seconds.
When the timer duration comes to an end, an audible
signal sounds and a note appears on the display. The
symbol is no longer lit up.
If the set timer duration relates to the appliance
Tip:
operation, use the cooking time. The time is visible in
the foreground and the appliance switches off
automatically.
Changing and cancelling
To change the timer duration, touch the t field. The
timer duration is displayed in white and in focus, and
can be changed by using the rotary selector.
If you want to cancel the timer, reset the timer duration
to zero. Once the change has been applied, the symbol
is no longer lit up.
16
PDishes
Y ou can use the "Dishes" operating mode to very easily
D i s h e s
prepare food. The appliance chooses the optimal
setting for you.
Applying settings for dishes
Using the rotary selector, go through all the dishes to
see which dishes are available in AutoPilot.
The cooking time depends on the dish and cannot be
changed.
Touch the % field.
1.
The first dish is highlighted in white in the display.
Turn the rotary selector to set the required dish.
2.
Use the l Start/Stop button to confirm.
3.
A note on accessories and shelf position is
displayed.
Press the l Start/Stop button to start.
4.
The appliance begins to heat up.
Once the cooking time has elapsed, an audible signal
sounds. The appliance stops heating.
When your dish is ready, use the ÿ On/Off button to
switch off the appliance.
Continuing cooking
After the cooking time has ended, you can leave some
dishes to continue cooking if you are not satisfied with
the cooking result.
A query appears on the display, which asks if you want
to continue cooking. If you want to continue cooking,
press the l Start/Stop button. A cooking time is
suggested, which can be changed. Press the l Start/
Stop button to start.
You can extend the cooking time as often as
Note:
required.
When you are satisfied with the cooking result, touch
the % field.
Press the ÿ On/Off button to switch off the appliance.
Setting a later end time
You can set a later end time for some dishes. Before
starting the appliance, touch the s field and set a later
end time using the rotary selector.
The appliance switches to standby after it is started. The
end time can no longer be changed.
Changing and cancelling
After starting the appliance, the settings can no longer
be changed.
If you would like to cancel the operation, switch the
appliance off using the ÿ On/Off button. You can no
longer pause the operation using the l Start/Stop
button.