![Bosch CMG633B.1 ユーザーマニュアル](/uploads/products/server2/1377722/1377722.jpg)
Touch field
Function
on the in-
side
Types of heating
Temperature
AutoPilot
Weight
Microwave
MicroCombi
Time-setting options
Rapid heating
4.4 Control ring
You can use the control ring to change the setting val-
ues that are shown in the display.
If you have reached the maximum value for setting val-
ues, such as the temperature, minimum or maximum
value, this value remains in the display. If required, use
the control ring to turn the value back again.
For lists, e.g. the types of heating, the first value starts
again after the last value.
4.5 Display
The display shows the current setting values on differ-
ent levels.
Value in the
The value in the foreground is high-
foreground
lighted in white. You can use the control
ring to change the value directly.
Once operation has started, the temper-
ature or level is displayed in the fore-
ground.
When using the microwave, the cooking
time is displayed in the foreground.
Value in the
Values in the background are displayed
background
in grey. To change the value using the
control ring, select the required function
in advance.
Enlarge-
As long as you use the control ring to
ment
change a value, only this value will be
displayed as enlarged.
Display ring
The display ring is located around the outside of the
display.
¡ Position indicator
If you change a value, the display ring shows you
where you are in the selection list. The display ring
may be continuous or divided into segments de-
pending on the settings area and the length of the
selection list.
¡ Progress indicator
During operation, the display ring displays the pro-
gress and turns red at second-long intervals.
As the cooking time counts down, one segment of
the display ring disappears every second.
Use
Select the operating mode types of heating.
Select the temperature in the cooking compartment.
Select the AutoPilot operating mode with cooking programmes.
Select the weight for the operating mode.
Select the microwave operating mode.
Select the MicroCombi operating mode.
Select the time-setting options.
Starts or cancels rapid heating for the cooking compartment.
Temperature display
The heating line and the residual heat indicator show
you the temperature in the cooking compartment.
Due to thermal inertia, the temperature that is displayed
may differ slightly from the actual temperature inside
the cooking compartment.
¡ Heating line
¡ Residual heat indicator
Familiarising yourself with your appliance en
Once operation has started, the white line below the
temperature turns red as the cooking compartment
heats up. When you are preheating the appliance,
the optimal time to place your food in the cooking
compartment is as soon as the entire line has
turned red.
With set levels such as grill settings, the heating line
turns red immediately.
The heating line does not appear when using the
microwave.
When the appliance is switched off, the display ring
shows the residual heat in the cooking compart-
ment. As the residual heat dissipates, the display
ring gets darker before eventually disappearing
completely.
9