- ページ 2

リモコン AirStage 9374136018のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AirStage 9374136018 2 ページ。 Wireless type

ページを印刷する

PREPARATION

REMOTE CONTROLLER HOLDER

To set the remote controller in

the holder

1. Insert.

2. Press in.

To take out the remote con-

troller from the holder

1. Slide up.

2. Pull out.

SET THE CURRENT TIME

1. Press the TIME ADJUST

button.

2. Press the

3. Press the TIME ADJUST

button.

1, 3

NOTES

(1) The remote controller must be pointed at signal receiver to operate correctly.

(2) Operating range : About 7 meters.

(3) Beeping sound

• When a signal is properly received by the air conditioner, a beeping sound will

be heard twice.

• If an invalid signal is received by the air conditioner, a beeping sound will be

heard 5 times.

• If no beeping sound is heard, press the remote controller button again.

(4) The buttons except the SLEEP, TIME ADJUST and ACL buttons can only be se-

lected while in operation mode.

(5) PROGRAM timer

• The PROGRAM timer allows you to integrate OFF timer and ON timer opera-

tions in a single sequence.

• The first timer function to operate will be the one set nearest to the current time.

(6) SLEEP timer

To prevent excessive warming or cooling during sleep, the SLEEP timer function

automatically modifies the set temperature in accordance with the time setting.

When the set time has elapsed, the air conditioner completely stops.

(7) When connecting with other controllers, the indoor unit might be controlled by the

other controllers.

(8) The wired remote controller or the simple remote controller can also be used with

this unit.

SLEEP TIMER

To set or change the SLEEP Timer

1. Press the

2. Press the

Adjust the OFF TIME.

To cancel the SLEEP Timer

Press the

Select

(TIMER RESET).

The air conditioner will return to normal operation.

MASTER CONTROL

Press the

NOTES

AUTO

(Select operation

mode automatically.)

"AUTO" and "FAN" cannot be selected in AIRSTAGE™

button.

(VRF system) Heat Pump model.

"HEAT" cannot be selected in Cooling Only model.

TEMPERATURE

Press the

NOTES

Temperature setting range

AUTO • • • • • • • • • • • • • • 18 to 30 °C

HEAT • • • • • • • • • • • • • • • 16 to 30 °C

COOL/DRY • • • • • • • • • • 18 to 30 °C

The thermostat setting should be considered a standard

value, and may differ somewhat from the actual room tem-

perature.

AIR DIRECTION (UPPER AND LOWER)

Press the

For swing operation:

Press the

Stop the setting by pressing it again.

NOTES

Refer to the operating manual of the indoor unit for range

of swing.

(SLEEP) button.

button.

button while in operation.

COOL

DRY

FAN

HEAT

button while in operation.

START / STOP

button while in operation.

Each press of the

button alternates opera-

tion and stop.

OPERATION

ON / OFF TIMER

1. Press the

Select

(OFF TIMER) or

NOTES

RESET

2. Press the

Adjust the OFF or ON TIME.

PROGRAM TIMER

To set or change the PROGRAM Timer

1. Press the

Select

(OFF TIMER).

2. Press the

Adjust the OFF time.

3. Repeat Step 1 and 2 to adjust ON time.

4. Press the

Select

(If the ON timer has been selected to operate

first, the unit will stop operating at this point.)

To cancel the PROGRAM Timer

Press the

button.

Select

(TIMER RESET).

The air conditioner will return to normal operation.

FAN SPEED

Press the

button while in operation.

NOTES

AUTO

(Select the fan speed

automatically.)

AIR DIRECTION (RIGHT AND LEFT)

Press the

button while in operation.

For swing operation:

Press the

button while in operation.

Stop the setting by pressing it again.

NOTES

Refer to the operating manual of the indoor unit for range of

swing.

button.

(ON TIMER).

OFF TIMER

ON TIMER

PROGRAM TIMER (OFF←ON, OFF→ON)

button.

(PROGRAM TIMER).

HIGH

LOW

MED