- ページ 13

オーブン Bosch Divar 700 SeriesのPDF 基本手順をオンラインで閲覧またはダウンロードできます。Bosch Divar 700 Series 14 ページ。 Digital hybrid recorder digital network recorder
Bosch Divar 700 Series にも：インフォメーション (11 ページ), 仕様 (8 ページ), クイックインストール (4 ページ), 操作マニュアル (22 ページ), クイックインストール (4 ページ)

OPERATIONS TO CHECK

REMAINING FUNCTIONALITIES

1. Latch mechanism and cooling fan high speed. Press

[Cooking Mode] key then turn the knob CW until the CLEAN

mode is found. Press [Start] key once and again when the

writing REMOVE RACKS appears. The control runs the latch

until the door is locked. Just a while before the lock symbol is

displayed, the cooling fan switches to high speed. Check that

the door is actually fully locked. To unlock the door, press

[Cancel] key and wait for the lock symbol on the display

disappear. Now the door has to be fully unlocked.

2. Door switches and cavity lights. Open the door, if the cavity

lights turn on it means that the control has detected a change.

Close the door, the lights must turn off. If the lights don't turn

on, try to press the [Light] key and be sure to hear a key

pressed tone. If the lights still remain off, they are probably

broken. If no tone is heard, then the [Light] key is not

working.

3. Keyboard and thermal cavities. Select the lower cavity by

pressing [Upper/Lower] key, until the box is displayed in the

lower oven position (only for double oven). Press [Cooking

Mode] key, BAKE will flash. Turn the knob CW until BAKE

mode is found again. If the cavity is set as thermal, only

BAKE, BROIL CLEAN and WARMING must be available.

Press [Temperature] key and see that the displayed

temperature is flashing. Press [Start] to run the cooking mode

then [Lower Cancel] (simply [Cancel] for a single oven) to

stop it.