- ページ 9

オーブン Bosch HB 74R SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Bosch HB 74R Series 28 ページ。

ページを印刷する

Press the

sensor.

The time when the dish will be ready and the end time

symbol

will be shown on the display panel.

Delay the end time using the

Press the ºC sensor.

Set the temperature or required grill power using the

sensors.

The programmed temperature and the

on the display panel, and the oven will be set to standby. When

the oven turns on, the programmed temperature and the

symbol will be shown. The

The cooking time has finished

A beep will sound. The oven will stop heating. The display

panel will show

. Press the

‹‹

a new cooking time with the

sensor and turn the function control knob to zero. The oven is

switched off.

Changing the basic settings

This oven has different basic settings. The settings can be

adapted to the user's own needs.

Basic setting

Duration of signal after the cooking time or the time set on the

™‚

timer has elapsed

Time indicator

™ƒ

Time until a setting is applied

™„

The shelf support rails have been refitted.

™†

Select default settings for all values.

™‡

* Default setting

The oven must be switched off.

Press the

sensor for approximately 4 seconds.

The display panel will show the current basic setting for the

duration of the signal, e.g.,

Change the basic setting using the

sensors.

symbol will be shown

symbol turns off.

sensor twice. You can set

sensors, or press the

Option

™‚

sensors.

Changing the end time

Press the sensor

the

sensors. The altered time is shown after a few

seconds. Do not change the end time if the cooking time has

already started to count down. The final result may not be the

same.

Cancelling the end time

Press the

sensor three times and reset the end time to the

current time with the

Viewing the time settings

If several time functions are programmed, the corresponding

symbols light up on the display panel.

To view the timer

the time

, press the

symbol lights up. The corresponding value will be shown for a

few seconds on the display panel.

Time

Once the oven has been connected or after a power cut, the

and

symbols light up on the display panel.Set the clock

‹

‹‹

to the right time.

Press the

The time is displayed

Set the time with the

Confirm the time with the

The programmed time is displayed after a few seconds.

Changing the time

No other time function must be programmed, the oven must be

switched off.

Press the

The display panel displays

Set the time with the

Confirm the time with the

The programmed time is displayed after a few seconds.

Hiding the time

The time can be hidden. See the Modifying basic settings

chapter.

Option 0 Option 1

approx. 10 sec approx. 2 min* approx. 5 min

yes*

approx. 2 sec

yes

no*

yes

Confirm with the sensor

The display panel shows the following basic setting. The

sensor allows you to run through all the settings and the

sensors allow you to modify them.

Finally, press the

All basic settings have been applied.

The basic settings can be changed again at any time.

three times. Change the end time using

sensor. The oven switches on.

, the cooking time

sensor repeatedly until the required

sensor.

‚ƒ

‹‹

sensors.

sensor.

sensor twice.

sensors.

sensor.

Option 2

approx. 4 sec* approx. 10 sec

sensor for approximately 4 seconds.

, the end time

Option 3