ページを印刷するSpecial accessories
Accessories may be purchased from the Technical Assistance
Service or from specialist retailers. There is a wide range of
accessories available for the oven in our catalogues and on the
Internet. Ordering online and the availability of special
accessories changes from country to country. Consult your
purchase documentation.
Not all of the special accessories are suitable for all appliances.
When purchasing, always give the exact name (E-Nr.) of your
appliance.
Special accessories
Flat enamel oven tray
Universal deep enamel tray
Wire shelf
Pizza tray
Glass casserole dish
Triple removable guide rails
Before the first use
This chapter indicates the steps that must be followed before
using your oven for the first time.
Setting the time
■
Heating the oven
■
Cleaning accessories
■
Read safety tips and warnings listed at the beginning of the
■
instructions. These are very important.
Setting the time
Once the oven has been connected, the
symbols light up on the display panel. Set the clock to the right
time.
Press the
0
button.
1.
The time symbol [
] and [
0
display panel.
Set the time using the control knob .
2.
Confirm time with the
0
3.
The programmed time is displayed after a few seconds.
Note: See the Time functions chapter to change the time.
HEZ number
HEZ361000
HEZ362000
HEZ364000
HEZ317000
HEZ915001
HEZ368301
and
:
0
‹‹
‹‹
:
] are displayed on the
‚ƒ
‹‹
button.
Use
For cakes, pastries and biscuits.
For juicy pies, pastries, frozen meals and large joints for roast-
ing. This can also be used as a tray to collect the fat when
roasting directly on the wire shelf.
For cookware, baking tins, roasts, items placed directly on a
wire shelf and frozen meals.
Ideal for pizza, frozen foods, or large round cakes. The pizza
tray can be used instead of the universal deep tray. Place the
tray on the wire shelf and follow the indications in the tables.
The glass casserole dish is ideal for preparing stews and
foods that need browning in the oven. It is especially suitable
for automatic programmes and automatic roasting.
The triple guide rails at heights 1, 2 and 3 ensure that acces-
sories can be fully removed without them tipping over.
Heating the oven
To remove the "new" smell, heat the oven empty with the door
closed. The most effective option is to heat the oven for one
hour with the top and bottom heating elements
240 ºC. Check that no packaging has been left inside the oven.
Press the
%
button.
1.
It is recommended to use the 3D hot air
a temperature of 160 °C. The square brackets appear on the
left and right of the heating type.
Set the type of heating to top and bottom heating using the
2.
control knob
.
%
Select the temperature using the
3.
The square brackets appear on the left and right hand side of
the temperature.
Turn the temperature knob to 240 ºC.
4.
Press the
button.
n
5.
The oven comes on. The display shows the
After 60 minutes, turn the oven off using the
6.
The bars on the temperature control indicate the residual heat
inside the oven.
Cleaning the accessories
Before using the accessories for the first time, clean them
thoroughly using a cloth, hot water and a little soap.
%
set at
type of heating at
<
button.
X
n
symbol.
button.
%
7