- ページ 15

洗濯機 Electrolux 137098000のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Electrolux 137098000 20 ページ。 Electrolux front-load washer installation instructions

Reversing door and hardware

E) Reattaching Door Lock to Front Panel

1 Rotate the door lock and move it to the

opposite opening.

2 Connect the harness to the door lock by

inserting it in the terminal and firmly pushing

it in place.

3 Insert the harness connection through the

front panel first, and then pivot the lock until

it is flush. Slide the lock toward the center of

the front panel until the screw holes line up.

4 Secure the lock with 2 short, course-thread,

panhead screws.

Reversing Door

F) Reattaching Hinge to Front Panel

1 Rotate the hinge and move it to the opposite

opening.

2 Connect the harness to the hinge retainer

by inserting it in the retention terminal and

gently pushing until you hear the fastening

tab click.

3 Gently pull on the harness to be sure it is

secure.

4 Use the side locating pins to align the hinge

and install 1 short, fine-thread, counter-sunk

screw in the center hole of hinge side.

5 Install the other 2 short, fine-thread, counter-

sunk screws in the upper and lower holes of

hinge side.

6 Install 2 short, course-thread, panhead

screws through hinge plate.