- ページ 23

洗濯機 Electrolux 300 SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Electrolux 300 Series 46 ページ。 Front load dryer
Electrolux 300 Series にも：オーナーズマニュアル (11 ページ), 取扱説明書 (39 ページ), 取付説明書 (50 ページ), 取扱説明書 (28 ページ)

ページを印刷する

Completing the installation

1. Connect the exhaust duct to the outside

exhaust system. Use of a 4" (102 mm)

clamp (item A) is recommended to

connect the dryer to the exhaust vent

system. Use metal foil tape to seal all

other joints.

2. Use a carpenter's level to level your

dryer front-to-back and side-to-side.

3. Use adjustable pliers to adjust the

leveling legs so the dryer is level front-

to-rear and side-to-side, and stable

corner-to-corner.

4. Press down on alternate corners

and sides and feel for the slightest

movement. Adjust the appropriate

leg(s) so the dryer sits solidly on the

floor on ALL four legs. Keep the leveling

leg extension at a minimum for best

performance of the dryer.

IMPORTANT

Be sure the power is off at a circuit

breaker/fuse box before plugging the

power cord into an outlet.

Installation

5. Plug the power cord into a grounded

outlet.

WARNING

Improper grounding of the dryer may

cause serious injury or death. Check with

a licensed electrician if you are in doubt

as to whether the appliance is properly

grounded.

WARNING

Do not store combustible materials,

gasoline, and other flammable vapors

and liquids near this dryer.

6. Turn on the power at the circuit breaker/

fuse box.

7. Read the Use & Care Guide provided

with the dryer. It contains valuable and

helpful information that will save you

time and money.

8. If you have any questions during initial

operation, please review the "Avoid

Service Checklist" in your Use & Care

Guide before calling for service.

9. Place these instructions in a location

near the dryer for future reference.

NOTE

A wiring diagram and technical data

sheet are located under the dryer top

panel.

CAUTION

When discarding or storing your old

dryer, remove the door.