- ページ 19

洗濯機 Electrolux EFLS210TISのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Electrolux EFLS210TIS 22 ページ。 Front load dryer
Electrolux EFLS210TIS にも：取扱説明書 (29 ページ)

In some instances, an alarm code will be shown on the display and a tone will be emitted by

the unit. The alarm code will be flashed in alternating fashion between the letters "AL" and a

specific two-character code. Before calling for Service, refer to the table below for possible

solutions to the alarm codes listed.

ALARM CODE

AL 50

AL 97

AL H0

If any other Alarm Codes other than the ones listed above are shown on the display, first try

to reset the appliance by either turning the knob to the reset position (12 o'clock position)

or powering off the unit off and back on. If any Alarm Code reappears after resetting the

appliance, contact Service for further assistance.

Solutions to Common Problems

POSSIBLE CAUSES

The motor has been

overloaded.

There is a disrupt in internal

communication between

electronic elements of the unit.

There is an issue with the

power supply.

SOLUTIONS

Remove the laundry from the drum,

reset the appliance by either turning

the knob to the reset position (12

o'clock position) or powering off the

unit off and back on, select any cycle

and press start. Ensure the motor is

functioning properly.

Reset the appliance by either turning

the knob to the reset position (12

o'clock position) or powering off the

unit off and back on.

• Wait until the power supply is stable.

• Ensure the power cord is still in

proper operating condition.

• Ensure the wall outlet is in proper

operating condition.

• Reset the appliance by either turning

the knob to the reset position (12

o'clock position) or powering off the

unit off and back on.