- ページ 18
オーブン Bosch HBC86K753BのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Bosch HBC86K753B 44 ページ。 Compact oven with microwave
Basic setting
Restore factory settings:
no
Changing the basic settings
Prerequisite: The oven must be switched off.
Example: Changing the acoustic signal duration basic setting
from medium to short.
Press and hold the
button for approx. 4 seconds until the
°
1.
"Basic settings" heading and the first basic setting "Select
language: English" appears.
Turn the
X
button to select the required basic setting.
2.
Automatic switch-off
Your oven has an automatic switch-off function. It is activated if
no cooking time is set and the settings have not been changed
for a long time. The point at which this occurs depends on the
temperature or grill setting that has been set.
Switch-off activated
"Automatic switch-off" appears in the display. Operation is
Care and cleaning
With careful care and cleaning your microwave oven will retain
its looks and remain good order. We will explain here how you
should care for and clean your appliance correctly.
:
Risk of electric shock!
Do not use any high-pressure cleaners or steam cleaners,
which can result in an electric shock.
:
Risk of burns!
The appliance becomes very hot. Never touch the interior sur-
faces of the cooking compartment or the heating elements.
Always allow the appliance to cool down. Keep children at a
safe distance.
Notes
Slight differences in colour on the front of the appliance are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
Unpleasant odours, e.g. after fish has been prepared, can be
■
removed very easily. Add a few drops of lemon juice to a cup
of water. Place a spoon into the container as well, to prevent
delayed boiling. Heat the water for 1 to 2 minutes at
maximum microwave power.
Cleaning agents
To ensure that the different surfaces are not damaged by using
the wrong cleaning agent, observe the information in the table.
Do not use
sharp or abrasive cleaning agents,
■
18
Options
no
yes
Explanation
Reverse all changes and restore basic settings.
You can change the basic setting by turning the rotary
3.
selector.
You can now make further changes to the basic settings To
4.
do so, use the
Y
or
X
setting. Change the basic setting by turning the rotary
selector.
Press and hold the
button until the clock appears. This
°
5.
takes about four seconds. All changes are saved.
Cancelling
Press the
button. The changes are not applied.
%
interrupted. Press any button to clear the text. You can make
new settings.
Note: If a cooking time is set, the oven stops heating once the
cooking time has elapsed. The automatic switch-off function is
not necessary.
metal or glass scrapers to clean the glass in the appliance
■
door,
metal or glass scrapers to clean the door seal,
■
hard scouring pads and sponges,
■
cleaning agents with high concentrations of alcohol.
■
Wash new sponge cloths thoroughly before use.
Area
Cleaning agents
Control panel
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Do not use glass cleaners or
metal or glass scrapers for cleaning.
Stainless steel
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Remove flecks of limescale,
grease, starch and albumin (e.g. egg
white) immediately. Corrosion can form
under such residues. Special stainless
steel cleaning agents can be obtained
from the after-sales service or from
specialist shops.
Oven
Hot soapy water or a vinegar solution:
Clean with a dish cloth and dry with a
soft cloth.
If oven is very dirty: use oven cleaner,
but only when oven is cold. It is best to
use a stainless-steel sponge.
Glass cover for the
Hot soapy water:
oven light
Clean with a dish cloth.
Outer door panel
Glass cleaner:
Wipe dry immediately using a soft cloth.
Do not use a glass scraper.
Inner door glass
Glass cleaner:
Wipe dry with a soft cloth. Do not use a
glass scraper.
button to switch to the desired